GE DS3800HLXB Link Master Transfer/Receiving Board

GE DS3800HLXB Link Master Transfer/Receiving Board

Part Number DS3800HLXB Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800HLXB is a Link Master Transfer/Receiving Board developed by GE. It is a part of Mark IV control system. It acts as a link between various components and facilitates the transfer and reception of data. It is primarily responsible for facilitating communication within a control system. 

 Features It acts as a central hub for transferring data between various components within the control system. It can receive data from one component and transmit it to another, ensuring smooth and efficient communication between different parts of the system. It can translate data between different communication protocols used by the connec ted components, allowing them to communicate effectively even if they use different standards. 

It can handle synchronization tasks, ensuring that data transmission and reception occur at the appropriate timing. This synchronization helps maintain the overall system integrity and accuracy. The board have built-in mechanisms for detecting faults or errors in the communication process. It can monitor the health and status of the connected components and take appropriate actions, such as retransmission or error handling, to maintain system reliability. It have network management capabilities. It can manage network configurations, handle addressing schemes, and provide diagnostic information for troubleshooting and maintenance purposes.

The IO module has the following main functions

Input Function

The IO module can receive input signals sent by external devices and convert them into digital or analogue signals for use by the computer system or control system. These input signals can come from a variety of sensors, such as temperature sensors, pressure sensors, photosensitive sensors and so on. By receiving and parsing these input signals, the system can monitor and control the external environment in real time.

Output Functions

The IO module is capable of converting the output signals generated by a computer system or control system into the form required by an external device. These output signals are typically used to control actuators such as motors, valves, lights, etc. By sending appropriate output signals to external devices, the system enables control and operation of the external environment.

Data Acquisition and Processing

The IO module is capable of acquiring data from external devices and transferring it to a computer system or control system for further processing. This enables the system to acquire environmental data, status information and user inputs in real time and make appropriate decisions or perform specific tasks based on these data.

Communication Interfaces

IO modules are usually equipped with different types of communication interfaces, such as serial interfaces (RS232, RS485), Ethernet interfaces, CAN bus interfaces, and so on. These interfaces enable IO modules to exchange data and communicate efficiently with computer systems or other external devices.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is used only under appropriate conditions and in a condition fully suitable for use.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.