FOXBORO FBM215 P0917TQ Communication Output Module

FOXBORO FBM215 P0917TQ Communication Output Module

Product Overview

The FBM215 P0917TQ module is one of FOXBORO's compact HART® communication output interface modules, which provides eight isolated output channels, each of which can either output a standard 4 to 20 mA analogue signal, or a digital HART Frequency-Shift-Keyed (FSK) signal superimposed on that analogue signal. This enables the module to support both standard analogue devices and HART intelligent devices, enabling more flexible and efficient communication and control.

Technical Features

Eight-channel isolated output:

The module provides eight fully isolated output channels, each of which can work independently without interfering with each other.

Each channel can be selected to output a 4 to 20mA analogue signal or a HART FSK digital signal superimposed on the signal.

HART communication function:

As a HART communication field device host, the FBM215 P0917TQ enables the Foxboro DCS (Distributed Control System) to request and receive two digital messages per second from field devices.

HART general, common, and device-specific commands are supported, but burst communication mode is not supported.

High accuracy and stability:

Analogue output signals are accurate up to ±0.05% of range (between 4mA and 20mA).

The modules are designed to be rugged and suitable for G3 class (harsh) environments, ensuring stable operation in a variety of industrial sites.

Galvanic isolation and protection:

All output channels are galvanically isolated from each other, as well as from ground and module logic, increasing system safety and reliability.

Each channel has inter-channel galvanic isolation, current limiting and voltage regulation to effectively protect field devices and the module itself.

Easy to install and maintain:

The modules are mounted on a Compact 200 series base plate that can either be mounted on a DIN rail or horizontally in a rack using a kit.

The light-emitting diode (LED) on the front of the module visually displays the module's operating status and channel communication activity, making it easy for users to perform troubleshooting and maintenance.

Application Areas

FBM215 P0917TQ communication output module is widely used in industrial automation control system, especially in the occasions that need to support analogue devices and HART intelligent devices at the same time. It is suitable for many industries such as petroleum, chemical, electric power, metallurgy, etc. It provides stable and reliable communication and control interfaces for various field devices.

Product Advantages

High performance: Provides high-precision and high-stability analogue and digital output signals to meet the needs of various industrial sites.

Flexibility: support a variety of communication protocols and device types, to achieve more flexible and efficient communication and control.

Reliability: Adopts rugged design and high quality materials to ensure stable operation in various harsh environments.

Ease of use: Provides intuitive status display and convenient installation and maintenance methods, reducing the user's operating difficulties and maintenance costs.

Product Parameters

Processor: 32-bit RISC processor

Clock frequency: 100 MHz

Memory: 128MB

Flash memory: 256MB

Communication interface: RS-232/485, Ethernet, etc.

Input/output interface: analogue input/output, digital input/output

Operating temperature: -25°C to +60°C

Storage temperature: -40°C to +85°C

Relative humidity: 5% to 95% (non-condensing)

Protection rating: IP65

Product specification: 300mm x 200mm x 100mm

Installation and Maintenance

Environmental conditions:

Ensure that the module is installed within the recommended temperature and humidity ranges and avoid direct exposure to water, oil, dust or electromagnetic interference.

Power Requirements:

Use a stable power supply to avoid damage to the module from voltage fluctuations.

Signal Cable Connection:

Connect the signal lines correctly to ensure the accuracy and stability of signal transmission.

Software Configuration:

Correctly configure the software parameters of the module according to the system requirements to ensure compatibility with other parts of the control system.

Maintenance and Inspection:

Perform regular maintenance and inspection of the module, including cleaning and checking the contact status of the connectors.

Precautions

Operator Training:

Operators should receive proper operation and maintenance training to avoid malfunctions or safety accidents caused by incorrect operation.

Technical Documentation and Safety Guidelines:

The technical documentation and safety guidelines provided by the manufacturer should be read and understood in detail before installation and use.

Compliance with safety procedures:

Observe all relevant safety procedures to ensure personal safety, especially when handling high-pressure or high-speed rotating equipment.