Welcome to the Industrial Automation website!

Product
Article
NameDescriptionContent
HONG  KANG
E-mail  
Password  
  
Forgot password?
  Register
HOME ⊙ XYCOM ⊙ Xycom 3515 KPM PM101906 Operator Interface
当前位置：

Xycom 3515 KPM PM101906 Operator Interface

来源: | 作者:FAN | 发布时间 :2025-05-29 | 535 次浏览: | Share:
Xycom 3515 KPM PM101906 Operator Interface
Product Overview
The 3500 series of flat panel industrial PCs with 6-slot ISA/PCI expansion include the 3515, 3515KPM, and 3512KPM models.
These industrial PCs offer a powerful, compact package for the factory floor and other harsh environments.
The 3515 is an industrial PC with a display only (touchscreen optional).
The 3512KPM and 3515KPM is an industrial PC with a display, integrated keypads, and an integrated mouse.
They feature an open architecture to meet a wide variety of applications that require both a powerful PC and a durable industrial front panel.
The PCs integrate a computer card cage, mass storage, display, and power supply in a truly industrial form.
Their modular design allows easy access to expansion boards, jumpers, power supply, flat panel dis
play, and disk drives.
The front panel of every model is sealed to NEMA 4/4X/12, and the flat panel display is protected by an impact-resistant shield


Standard Features

With AHIP6+ board
Pentium® II technology
PCI 64 bit video controller, 2 MB video RAM
PCI local-bus IDE controller
Two 168-pin SDRAM DIMMs that support 32, 64, 128, and 256 MB options
Two USB ports
100MHz front side bus with Pentium II processors
With AHIP370+ board
Celeron ® technology
AGP 64 bit video controller, 2 MB video RAM
PCI local-bus IDE controller
Two 168-pin SDRAM DIMMs that support 32, 64, 128, and 256 MB options
Two USB ports
On all units
Two serial COM ports
RS-232
RS-232 or RS-485
Flat panel display
15-inch flat panel, 1024x768 resolution (3515 and 3515KPM)
12.1-inch flat panel, 800x600 resolution (3512KPM)


Parallel port

VGA port
Flash BIOS
9-inch mounting depth
3.5-inch internal, side access floppy drive
Six AT-bus full-length expansion slots
Four ISA slots
One ISA or PCI slot
One PCI (4.8” maximum length with AHIP6+ board)
IR Port (IrDA and ASKIR compatible)
Rear PS/2 keyboard port and AUX port (also a front PS/2 keyboard port on 3512KPM and 3515KPM)
Status LEDs
Power
Disk
Com
Input
3.5-inch internal IDE  hard drive
MS-DOS®
Front panel sealed to meet NEMA 4/4X/12 specifications when panel mounted in a
suitable fire and electrical enclosure.
Approved for use in Class I, Division 2 hazardous locations
Autosensing AC power supply
Side power connector with retainer bracket


Optional Features

Touchscreen resistive technology with less than 1.5% linearity error
Higher capacity IDE hard drives and solid state drives
3512KPM
40 relegendable function keys (80 with the F/A function)
Numeric, PC control, and alpha keypads
Integrated mouse
3515KPM
40 relegendable function keys (80 with the F/A function)
Numeric, PC control, and alpha keypads
Windows start menu and pop-up menu keys
Integrated mouse
Flat-panel display
15.0-inch TFT flat panel (3515 and 3515KPM)
12.1-inch TFT flat panel (3512KPM)
CD-ROM (internal)
Pre-installed PCI 10/100 Base-T Ethernet card
External floppy drive 9000-EXF
Front mount floppy kit 9000-FFK
Front access panel for floppy port and keyboard port 9000-FKA
Preloaded Microsoft Windows 95 or Windows NT® operating system


Product Overview

Xycom 3515 KPM PM101906 is an operator interface designed specifically for industrial environments, aimed at providing efficient and convenient human-machine interaction solutions for various automation systems. This interface has been widely used in the field of industrial automation due to its reliable performance, rich functionality, and good compatibility.


Specification parameters

Display specifications: Equipped with a 15 inch display screen, it can clearly present various information and meet the data visualization needs of industrial sites. Whether it is monitoring complex process flows or displaying equipment operating parameters, it can provide intuitive and accurate visual feedback for operators.

Electrical parameters: The working voltage supports 115V AC or 230V AC, with a frequency of 50/60Hz, suitable for power supply standards in different regions. The rated current is 6.3A, ensuring stable operation under normal working load and providing power guarantee for the continuous and reliable operation of the equipment.

Physical specifications: The overall design is compact, with optimized dimensions and weight, making it easy to install on various industrial control cabinets or workstations. Its sturdy shell material has certain protective properties, which can resist interference such as dust and vibration in industrial environments, ensuring the normal operation of the equipment under harsh conditions.


Core functions

Convenient operation: With a concise and clear interface, operators can get started without complex training. Through an intuitive graphical interface and convenient operation buttons, it is possible to quickly start, stop, and adjust parameters of the automation system, thereby improving work efficiency.

Data Interaction: Supports data communication with various industrial equipment and control systems, enabling real-time acquisition of equipment operating status, process parameters, and other information, and accurately transmitting operator instructions to the corresponding equipment. This efficient data exchange capability makes the entire automated production process more coordinated and smooth.

  • Woodward 8440-1706 Industrial Control System Module
  • Woodward 8440-2052 H Synchronizer Load Share Module
  • Baldor KPD-TS12C-30E 12.1" Color TFT Touch Screen Ethernet HMI
  • Baldor KPD-TS10C-30E 10" Color TFT Touch Screen Operator Interface with Serial and Ethernet Interfaces
  • Baldor KPD-TS05C-30E 5.6" Color TFT Touch Screen with Serial and Ethernet Interface
  • Baldor KPD-TS05C-30 5.6 Inch Color TFT Touch Screen Serial Interface
  • Baldor KPD-TS05M-10 5.6" Monochrome Touch Screen Serial Interface HMI
  • Baldor KPD-TS03M-10 Monochrome Touch Screen Operator Interface
  • Baldor KPD-KG420-30 4x20 Graphic Display with 12 Function Keys - Serial Interface
  • Baldor KPD-KG420-20 4x20 Character Graphic Display Serial Interface
  • WOODWARD EASYGEN-3200-5 8440-1992 A Genset Controller
  • WOODWARD PEAK200-HVAC 8200-1501 C Version | Industrial Building Automation Controller
  • Woodward 8440-2052 easyGEN-3200 Genset Control Power Management
  • Woodward 8237-1246 + 5437-1119 Control System Module
  • WOODWARD SPM-D11 8440-1703 Overspeed Protection System Module
  • WOODWARD 8237-1369 Governor Control Module
  • Woodward 8237-1600 Digital Control Module
  • WOODWARD BUM60-1224-54-B-001-VC-A0-0093-0013-G003-0000 3522-1004 Industrial Control Module
  • WOODWARD 8200-1302 Genset Controller
  • Woodward 8901-457 Speed Control Module
  • WOODWARD 5501-465 Control Module
  • Woodward 5448-890 SPM-D10 Digital Control Module
  • WOODWARD 5437-1067A Turbine Governor Actuator
  • Woodward 8440-1666 B Digital Control Module
  • WOODWARD 8440-1706 A SPM-D11 Synchronous Phase Modulator Module
  • WOODWARD 5466-425 Programmable Automation Controller (PAC)
  • WOODWARD 5466-318- Industrial Gas Turbine Control Module
  • WOODWARD 5453-277 Digital Control Module
  • WOODWARD 5453-203 Digital Governor Control Module
  • WOODWARD 9907-1106 Pressure Converter
  • WOODWARD 5233-2089 Professional Industrial Control System Module
  • WOODWARD 9907-147 Power outage tripping overspeed protection system
  • WOODWARD 8237-1600 Digital Speed Control System
  • WOODWARD 8402-319 8402-119 microprocessor speed controller
  • Woodward 8237-1006 Digital Governor
  • WOODWARD 5501-471 Communication Module
  • WOODWARD 5466-258 Input/Output Module
  • WOODWARD 5501-467 Multi Protocol Communication Gateway and I/O Expansion Module
  • WOODWARD 5501-470 Digital microprocessor controller module
  • WOODWARD 9907-1200 Digital Governor
  • WOODWARD 8444-1067 High Performance Digital Microprocessor Controller Module
  • WOODWARD 8446-1019 Integrated Gas Engine Electronic Control System
  • WOODWARD 9907-162 Digital Engine Governor
  • WOODWARD 5466-316 Simulation Combination Module
  • WOODWARD 5464-414 Digital Speaker Sensor Module
  • XANTREX XFR40-70 DC power supply
  • XP POWER F8B6A4A6A6 power module
  • XP POWER F8B6D4A3G3 power supply
  • XYCOM XVME-674 VMEbus Single Slot CPU/Processor Module
  • XYCOM XVME-957 Circuit Board
  • XYCOM XVME-976 PC board computer
  • XYCOM XVME-530 8-Channel Isolated Analog Output Module
  • XYCOM Proto XVME-085 Bus Module
  • YAMAHA RCX40 4-AXIS ROBOT CONTROLLER
  • YAMATAKE EST0240Z05WBX00 touch screen display
  • YAMATAKE HD-CAOBS00 flowmeter
  • HIMA X-COM 01 Communication Module
  • HIMA HIMax X-AO 16 01 Analog Output Module
  • HIMA X-AI3251 Analog Input Module
  • HIMA X-DO3251 Digital Output Module
  • HIMA X-DI3202 Digital Input Module
  • HIMA X-DI6451 Digital Input Module
  • YASKAWA USAHEM-02-TE53 AC servo motor
  • Yaskawa JZNC-XPP02B Teaching Programmer
  • YASKAWA CACR-SR07BE12M servo drive
  • YASKAWA JAMSC-B2732V Advanced Drive Controller
  • YASKAWA JGSM-06 Controller
  • YASKAWA PCCF-H64MS 64MB Industrial Memory Module
  • YASKAWA CACR-02-TE1K servo driver
  • YASKAWA JAPMC-IQ2303 Controller Module
  • YASKAWA DDSCR-R84H Controller
  • YASKAWA JANCD-XTU01B circuit board
  • YASKAWA JANCD-XIO01 High Performance PC Input/Output (I/O) Board
  • YASKAWA JACP-317800 servo drive
  • XYCOM 120974 - Circuit Board
  • XYCOM 99298-200 - PC Control Card 99207A-001
  • XYCOM 99298-266 - CPU Board
  • XYCOM 99311-001 - Screen Display Ribbon Cable
  • XYCOM 99384-002 - PCB Module 99383A-001
  • XYCOM A05520I01 - Control Module PW22471 MPL400
  • XYCOM A33369 - Dual PMC Carrier Module
  • XYCOM AC2064A1 - VMEbus PCB Board Analog Output
  • XYCOM AC2065A1 - VMEbus PCB Board Analog Output
  • XYCOM CDA XVME - DSP SCSI I/O Module Serial RS232
  • XYCOM 143913-001 - TSKAM Board Rev A
  • XYCOM 1300-000100000 - Operator Interface Node Module
  • XYCOM 140050(R) - Documentation Support Library
  • XYCOM 1811-A00000000 - SXT1811T Monitor 100-120V
  • XYCOM 3112T-1200-256-2K - Operator Interface
  • XYCOM 3115 T - Industrial Computer
  • XYCOM 3406T - Flat Panel Industrial PC
  • XYCOM 3512-03F114003 - Automation Operator Interface
  • XYCOM 3515-A2P214003 - Operators Interface 6.3A
  • XYCOM 3535 - Operation Panel 3535-E3T434003
  • XYCOM 3612 T - LCD Flat Panel Display
  • XYCOM 3715 - Industrial Touchpanel Touchscreen PC
  • XYCOM 4115 T - Light-Duty Flat Panel 2000-512-2K
  • XYCOM 50151 - Automation Display
  • XYCOM 5017-T - Flat Panel Industrial Touch Monitor
  • XYCOM 3308T - 8" Flat Panel Color Touchscreen PC
  • XYCOM 9000-FFP-HU - Industrial Module
  • XYCOM 9440 - Automation HMI 9440-026714001
  • XYCOM 3406 KPT - Automation Control Panel
  • XYCOM 3000-CBL-25VP - Video Cable 25' 7.5M
  • XYCOM CA3-MBPALL-41 - Modbus Plus Module for GP2000
  • XYCOM QPI-MBP-XA1 - Modbus Plus Communication Module
  • XYCOM 3512 T - Automation Model HMI PM-101722C
  • XYCOM PM-102159 - Xycom Automation Monitor
  • XYCOM 3115T - Automation Panel
  • XYCOM PM3510T - Touch Screen HMI
  • XYCOM XA_WIN_2K_MUI - Recovery Media 2 Disks Kit
  • XYCOM XT1502T-CU17 - Viewtronix Flat Panel Touch Display
  • XYCOM XVME-9660 - VMEbus Module 779660
  • XYCOM 8000 KB3 Industrial Keyboard 97788-001
  • XYCOM 8000 KB5 Keyboard Front Panel Repair Evaluation
  • XYCOM 8100 0272A CNC Brown Out Sensor PROM Card
  • XYCOM 81600EA Control Card 82088-004/R
  • XYCOM 81625DA Control Board PC Board
  • XYCOM 81862 003R PCB Circuit Board
  • XYCOM 818662 003 N Pcb Circuit Board
  • XYCOM 81945F Control Card
  • XYCOM 81987 001 D General Purpose I/O 1805 Circuit Board
  • XYCOM 82029BC PCB Circuit Board 82027-001-F
  • XYCOM 82034CA Processor Module Board PC Computer Board
  • XYCOM 83017 002 PCB Circuit Board
  • XYCOM 83034CA Processor Module Board
  • XYCOM 83060C Processor Module Board
  • XYCOM 83060CA Processor Module Board