XYCOM XVME-530 8-Channel Isolated Analog Output Module

XYCOM XVME-530 8-Channel Isolated Analog Output Module

Core positioning: Compatible with VMEbus 8-channel isolated analog output module, with Non Intelligent Kernel (NIKL) design as the core, used to convert digital signals into voltage or current analog signals.

Core technical parameters

Output specifications: Number of channels: 8; Resolution: 12 bits; Isolation level: 300V photoelectric isolation; Monotonicity: guaranteed

Accuracy and speed: Total error: ± 0.5 LSB+0.0122%; Conversion time: 42 μ sec; Stable time: Voltage mode 8 μ sec max, current mode 30 μ sec max

Output range: Voltage: 0-5V, 0-10V, ± 2.5V, ± 5V, ± 10V; Current: 4-20mA

Power supply requirements: Input voltage:+5V ± 5%; Typical current: 2.6A (4-20mA mode full range output)

Physical dimensions: Plate type: NEXP specification; Size: 160mm × 233.4mm

Environmental and reliability parameters

Temperature: 0-65 ℃ (32-149 ° F), -40-85 ℃ (-40-185 ° F)

Humidity: 5% -95% RH (no condensation), 5% -95% RH (no condensation)

Altitude: from sea level to 10000ft (3048m), from sea level to 50000ft (15240m)

Vibration: 5-2000Hz, 0.015in peak to peak displacement, 2.5g peak acceleration, 5-2000Hz, 0.030in peak to peak displacement, 5.0g peak acceleration

Impact 30g peak acceleration, 11ms duration 50g peak acceleration, 11ms duration

Core functional characteristics

Adhere to the XYCOM standard I/O architecture, standardize address offset, and support unified access to module identification, status/control registers.

300V optoelectronic isolation between digital and analog circuits enhances anti-interference capability and is suitable for complex industrial environments.

Supports monitoring/non monitoring mode access, compatible with IEEE 1014 VMEbus specification, and can seamlessly integrate with other VMEbus devices.

When the power is reset, all DACs are reset to 0000H. The unipolar mode outputs 0V, the bipolar mode outputs negative full-scale, and the current mode outputs 4mA.