ABB GJR5253100R4278 07KT98 Advant Controller Module

ABB GJR5253100R4278 07KT98 Advant Controller Module

Basic information

Type: Consists of the base type GJR5253100R4278 and the series code 07KT98, which is used to accurately identify the specific module within the ABB product range.

Place of origin: Sweden.

Functional characteristics

Input and output capacity:

Digital inputs: Equipped with 24 24V DC digital input channels, it can be connected to all kinds of digital sensors or switch signals, such as limit switches, pushbuttons, etc., and accurately collect the external digital signals into the controller.

Digital Output: Equipped with 16 24V DC digital output channels, it can directly drive loads such as relays, solenoid valves, etc. to achieve control of external devices.

Analogue input and output: Supporting analogue input and output, up to 232 analogue input channels and 224 analogue output channels can be configured to receive and output analogue signals such as temperature, pressure, flow rate, etc., which is suitable for monitoring and controlling continuously changing physical quantities. The analogue output channels have 4 channels with an output range of - 10... +10V, 11-bit signalled, and 0.... 20mA, 12 bit.

Processing power and memory:

Memory capacity: The user data memory is 1000kb and the user programme memory is also 1000kb, which can meet the storage requirements of more complex control programmes and large amounts of data.

Memory type: Flash EPROM, non-volatile RAM and SMC are used to ensure that data is not lost after power failure, which improves the reliability and stability of the system.

Configurability: There are 8 digital configurable I/O ports, users can flexibly configure these I/O ports as inputs or outputs according to specific application requirements, enhancing the versatility and adaptability of the module.

Counter function: Equipped with 2 hardware counters, which can be used to count pulse signals and are very useful in applications that require the counting of specific events or physical quantities, such as counting the number of products, measuring the speed of motors, and so on.

Technical data

Operating temperature range: 0... +55°C ambient air temperature during operation, +55°C during storage. +55°C in operation and -25... +75°C in storage. +75°C, can work in a wide temperature range, adapt to different industrial environment requirements.

Output Current and Voltage: The output current is 0.5A and the output voltage is 24V DC, which can provide stable power support for external loads.

Dimensions and weight: 12cm long, 10.5cm wide, 4.5cm high, weight 0.23kg, compact dimensions for easy installation and layout in control cabinets or equipment.

OTHER INFORMAITION

• The operator panel is designed for stationary installation on a planar surface, where the following conditions are fulfilled: 

– no high explosive risks 

– no strong magnetic fields 

– no direct sunlight 

– no large, sudden temperature changes 

• Install the operator panel according to the accompanying installation instructions. 

• Ground the operator panel according to the accompanying installation instructions. 

• Only qualified personnel may install the operator panel. 

• Separate the high voltage, signal and supply cables. 

• Make sure that the voltage and polarity of the power source is correct before connecting the operator panel to the power outlet. 

• Peripheral equipment must be appropriate for the application and location. 

• In a Zone 2 environment, this equipment shall be installed in an enclosure that provides a degree of protection not less than IP 54 or greater than IP 65 in accordance with IEC/EN 600079-0. The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into. 

• In a Zone 22 environment, this equipment shall be installed in an enclosure that provides a degree of protection not less than IP 64 or greater than IP 65 in accordance with IEC/EN 600079-0. The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into.