PROSOFT MT-11 AFC modules
PROSOFT MT-11 AFC modules
ProSoft Flow Computers
ProSoft AFC modules are in-rack Oil & Gas Flow Computers for Allen-Bradley’s ControlLogix, SLC 500, and PLC-5 processors and Schneider Electric’s Quantum processor. These modules support 8 or 16 meter runs for the measurement of hydrocarbon gases using the AGA 3, 7 and 8 measurement standards. For hydrocarbon liquid flow measurement, this solution uses API 2540 standard.
To obtain process inputs for the calculations, the module uses the process data collected by processor’s analog I/O modules.
ProSoft’s AFC module calculates flow rates, accumulated volumes and accumulated mass. The results of the calculations are transferred back to the processor for use in the application ladder logic, or for transfer to a SCADA host.
Key Features
• Hardware reliability
• Backplane compatibility
• Transient, Surge, RFI, EMI protection
• Proven track record
• Expandable I/O and RAM
• Battery-backed RAM
• Frequency Densitometer Interface
• Gas/Liquid Chromatograph Interface
• Field programmable
• Selectable multiple measurement standards
• Multiple meter runs
• PLC/FC/RTU Integrated Data Base
• Double Precision Math
• Selectable Meter Factor Characterization
• Accessible Data & System Interoperability
• Data Archiving
• Event Logging
• Dynamic Meter Audit Scan
• Local Display
• Data Security
• Fast Scan Times
• Good Error Detection
• MS Windows Based System Configuration
• Site Specific System Documentation and Reports
Using Field Instrumentation
Why HART?
For many years the fi eld communication standard for process automation equipment has been a milliamp (mA) analog current signal with a signal range of 4-20mA. The HART (Highway Addressable Remote Transducer) protocol extends this 4-20mA standard to enhance communication with smart fi eld instruments. HART allows two-way digital communications to occur without disturbing the integrity of the 4-20mA signal. HART signals are carried over the same wiring that is typically used for 4-20mA analog instruments. Instrumentation products equipped with the HART protocol are used in a wide range of applications and industries, providing cost saving benefi ts and improved performance worldwide. It has been estimated that nearly 2 million HART installations are in existence today and include: Rosemount, Endress & Hauser, Honeywell, and Yokagawa Transmitters.
HART Interface Modules
ProSoft Technology has a variety of HART interface modules offering connectivity solutions for smart fi eld instrumentation that supports HART multi-drop networks. The HART modules provide access to temperature, pressure, and multi-variable units, as well as, full access to digital confi guration, diagnostics, and maintenance information in each connected transmitter.
Modbus RTU Processor
ProSoft’s RTU 5/03 is a remote SCADA processor acting as a Modbus slave. Designed as a single-slot solution for Allen-Bradley’s SLC 500, the RTU 5/03 is targeted at SCADA applications primarily in the Oil and Gas industry.
email:1583694102@qq.com
wang@kongjiangauto.com