PROSOFT MVI56-PDPMV1 Communication Module
PROSOFT MVI56-PDPMV1 Communication Module
MVI56-PDPMV1
The MVI56 PROFIBUS DPV1 Master Communication Module is a powerful communication interface for ControlLogix processors. Developed under license from Rockwell Automation, the module incorporates proprietary backplane technology that enables powerful data exchange with ControlLogix processors.
Features and Benefits
The module supports complete Master specifications according to IEC 61158. Acyclic parameter data can be transferred with Class 1 or Class 2 DPV1 services, allowing processors to easily communicate with slave devices supporting PROFIBUS DPV0/V1 protocol.
The module acts as an input/output module between the PROFIBUS network and the ControlLogix processor. Data transfer from the processor is asynchronous with the I/O data transfer on the PROFIBUS network. Databases are user-defined and stored in the module to hold the data required by the protocol.
General Specifications
• Single Slot - 1756 backplane compatible
• The module is recognized as an Input/Output module and has access to processor memory for data transfer between processor and module
• Ladder Logic is used for data transfer between module and processor. Sample ladder file (add-on instruction) included.
• Local or remote rack
• Configurable I/O backplane sizes allow optimal performance for remote rack applications
• CIPconnect™ enabled. Module supports communications with ProSoft Configuration Builder and FDT comDTM via Ethernet routing using Rockwell Automation Ethernet interface.
PROFIBUS DPV1 Master Communication Module MVI56-PDPMV1
With the growing usage of the PROFIBUS DPV1 protocol in the industrial marketplace, this product has a wide variety of application uses. Industries that use this technology include:
• Power and distribution applications
• Petrochemical
• Water and Gas Applications
• SCADA and DCS applications
General Specifications
• Single Slot - 1756 backplane compatible
• The module is recognized as an Input/Output module and has access to processor memory for data transfer between processor and module
• Ladder Logic is used for data transfer between module and processor. Sample ladder file (add-on instruction) included.
• Local or remote rack
• Configurable I/O backplane sizes allow optimal performance for remote rack applications
• CIPconnect™ enabled. Module supports communications with ProSoft Configuration Builder and FDT comDTM via Ethernet routing using Rockwell Automation Ethernet interface.
PROFIBUS Master Specifications
• Up to 125 Slaves can be connected with a repeater
• Up to 1536 cyclic bytes input and 1536 bytes output data
• Supports Extended Diagnostic Data
• RS-485 optically isolated PROFIBUS Interface with on board DC-DC converter
• Acyclic communications (DPV1), Read and Write
• Alarm Handling (DPV1)
• Supports Sync and Freeze commands
• Supports PROFIdrive 3.1 compliant parameter read and write operations
• Supports Multicast and Broadcast telegrams (DPV1)
PROFIBUS Master Port
• DB-9F Optically Isolated RS-485
• Ready, Run, Error and Token LED Indicators
• PROFIBUS DPV1 RS-485 interface with a 9-pin D shell female connector and isolated Opto-Couplers
email:1583694102@qq.com
wang@kongjiangauto.com