Welcome to the Industrial Automation website!

Product
Article
NameDescriptionContent
HONG  KANG
E-mail  
Password  
  
Forgot password?
  Register
HOME ⊙ ABB ⊙ ABB IMASI23 module
当前位置：

ABB IMASI23 module

来源: | 作者:FAN | 发布时间 :2025-05-15 | 10 次浏览: | Share:


Termination Units

The IMASI23 module uses one NTAI06 termination unit to connect to field signals. An NKAS01 or NKAS11 cable connects the termination unit to the ASI module through its P3 connector.
The termination unit contains RTDs used for cold junction compensation of thermocouple inputs. They also contain the circuitry needed to convert 4 to 20 milliampere field signals into the 1 to 5 VDC needed to input to the analog input module.
The system power supply is protected from short circuits by fuses on the NTAI06 termination unit.
Function Codes
NOTE: Refer to Appendix C for function code specification changes required when replacing an IMASI03 module with an IMASI23 module.
FCs 215 and 216 in the controller configure the ASI module and identify the active analog inputs. One FC 215 is required for each ASI module.
One FC 216 is required for each input channel used on the ASI module.
These function codes specify the I/O expander bus address of the ASI module and the channel number on the module connected to a specific analog input signal.
The type of the input and the zero and span in engineering units must also be specified to ensure proper scaling and corrections for calibration, cold junction compensation, and nonlinearity correction.
Add FC 215 and 216 to the controller to configure the ASI module. Set FC 217 in the controller to calibrate the ASI module or to set the user gain and offset values.
Refer to the Composer Function Code Application Manual for more information.

IMASI23 ABB Analog Input Module,TC,MV,RTD.



  • GE IS210AEBIH3BE - Printed Circuit Board
  • GE MIWII - 1000E00HI00 High Precision Counter Module
  • GE Electric - IC693MDL931 Isolated Relay Output Module
  • GE Fanuc - IS215UCVEH2AE Advanced Gas Turbine Control System
  • GE 531X111PSHARG3 - Industrial Power Supply Card
  • GE DS200TCQCG1RJD - Power Supply Board for Industrial Control Systems
  • GE IC693PRG300 - G300 Hand-Held Programmer
  • GE FANUC - 78004654B High Performance Industrial PLC Module
  • GE A06B-6093-H101 - Servo Amplifier Unit Precision Control for Advanced Applications
  • GE DS200TCPDG2BEC - A Comprehensive Power Distribution Board for Industrial Control Systems
  • GE DS3800NPSJ1B1B - High-Performance Power Supply Board for Industrial Control Systems
  • GE GE - IS200GFOIH1A High-Performance Control Module for Industrial Automation
  • GE IS215ACLEH1AB - Original Equipment Manufacturer Control Module
  • GE Fanuc - F650BABF2G0IHI PLC Module High-Performance Control Core
  • GE DS200ADPBG1ABB - Precision Engineered Genius Adapter Module for Advanced Control Solutions
  • GE IS210HSLAH1ADE - High-Speed Serial Link Interface Circuit Board
  • GE IS215GFOIH1A/IS215GFOIH1AB/IS200GFOIH1A - Industrial Control Systems for Enhanced Performance & Reliability
  • GE CM415REBKH1B - Tuning Fork Crystal Unit for Industrial Control Systems
  • GE Fanuc - IC694MDL916 Advanced Programmable Automation Controller
  • GE Fanuc - SR469-P5-HI-A20 Motor Protection System Comprehensive Control for Large Motors
  • GE Electric - IC693ALG221 Affordable Industrial Control Module
  • GE Electric - DS200TCQRG1RFC Circuit Board Advanced IO Expansion Module
  • GE FANUC - IC694MDL740 Modular Control System Module
  • GE IC697MDL753 - Industrial Output Module Precision Control for Your Operation
  • GE DS3800HAFA1D - Industrial Control Module for Power Generation
  • GE DS200TCDAG1A - Advanced Digital I/O Board for Industrial Control
  • GE UR6TH - Module Digital Input/Output
  • GE FANUC - DS200SNPAH1ABB Advanced Gas Turbine Control Module
  • GE IS220PSCAH1A - IO Pack for Serial Communications
  • GE Fanuc - IC698PSA100E Durable Industrial Power Supply Module
  • GE IC693PWR322 - High-Performance Power Supply for Industrial Control Systems
  • GE FANUC - IC697CPM925 CPU MODULE Industrial Control Solution
  • GE IC3600SSLB1H1B - Gas Turbine Control Module
  • GE DS3800HPRB1A1A - Precision Pulse Rate Card for Industrial Control Systems
  • GE DS4820R20 - Relay Module (194B5704G1) Reliable Industrial Control Solution
  • GE IC698CHS009 - Rear Mounted Rack Industrial Control Module
  • GE IC694ALG392 - Analog Output Module for Industrial Control Systems
  • GE DS200TCDAH1BGD - Advanced I/O PC Board for Industrial Automation
  • GE Electric - DS200TCEAG1BTF Emergency Overspeed Board
  • GE IS420YAICS1B - Analog I/O Module for Industrial Control Applications
  • GE Fanuc - IC693PWR331CA-High-Efficiency Power Supply for Industrial Control Systems
  • GE UR9NH - CPUUR PLC CPU Module
  • GE SR735-5-5-HI-485 - Relay
  • GE Fanuc - 0285A7595 MGM115 Programmable Logic Controller Module
  • GE Fanuc - IC200MDL102 Input Modules Advanced Control Solutions
  • GE M60K03HKHF8LH4CM8NP6EUXXW5C - Industrial Control Module
  • GE Industrial - Systems IS200BICIH1ADC PCB Board
  • GE IC200CPU001 - Advanced Microcontroller Module
  • GE DS200TCQCG1BJF - PLC Overflow Board
  • GE Fanuc - IS200TRPGH1B Terminal Board Advanced Control Solution for Industrial Automation
  • GE IC693CPU313LT - Advanced Series 90-30 PLC Controllers
  • GE Industrial - Controls 8601-FT-NI Field Taerminal Module
  • GE IC200CHS001 - Industrial Control System I/O Carrier
  • GE IC693CHS397M - High-Performance Programmable Logic Controller Module
  • GE 0552N1QLG132A-01 - Control Module Advanced Industrial Automation Solution
  • GE A20B-1006-0270 - Keyboard Panel High-Performance Control Module
  • GE IS210AEAAH1BKE - Industrial Strength Mark VI PCB for Enhanced Turbine & Excitation Control Systems
  • GE Fanuc IC200UAL005 Versamax PLC - Industry-Leading Control Solution
  • ABB IMDSI14 Digital Input Modules
  • ABB HK1 - 11 Auxiliary Contacts Critical Connectors for Industrial Electrical Systems
  • ABB FI830F Fieldbus Module
  • ABB EI803F Ethernet Communication Module: Network Bridge for Industrial Automation
  • ABB EHDB280 drive contactors: powerful protection for industrial power control
  • ABB EHDB130 drive contactor: a reliable hub for industrial power control
  • ABB DSU14 High-performance control module for industrial automation
  • GE IC694CHS392 - BASE EXPANSION Advanced Control Module
  • GE Fanuc IS230SRLYH2A Mark VI Circuit Board - High Performance Control Solution
  • GE IC200UDD064 - Advanced Power Supply Module
  • GE IS200EMIOH1A - Advanced Control Module for Industrial Automation
  • GE Fanuc - DS3800HPIB1G1E Mark IV PLC Advanced Process Control Module
  • GE Electric - IS230SNRTH2A Advanced Control Circuit Board
  • GE Fanuc - IC693ALG220 Advanced PAC Systems RX3i Control Module
  • GE DS200RTBAG5AHC - Industrial Control System Module
  • GE Automation - IC200EBI001 Ethernet Network Interface Unit
  • GE IS200TPROH1BAA - Precision Engineered PCB for Industrial Control Systems
  • GE IS200PSCDG1ADB - Precision Engineered PSCD Exciter Card for Industrial Controls
  • GE Mark - VI IS200VSVOH1B Printed Circuit Board High-Performance Control Module for Advanced Systems
  • GE DS3800HMPK1J1J - Regulator Card Advanced Control Module for Industrial Applications
  • GE Electric - IS200SRTDH2ACB High-Performance Industrial Control Module
  • GE IS200ESYSH2A - Advanced EX2100e Series System Interface Board for Custom I/O Applications
  • GE Fanuc - FANUC A06B-0116-B203 Servo Motor Precision Control for Industry
  • GE FANUC - IS220PSCAH1B Advanced Gas Turbine Controls
  • GE Alstom - Microrec NEGTBCSR1 FEG-S032-J001 Control Module for Industrial Automation
  • GE IS200GDDDG1ACA - Precision PWM Gate Driver for Industrial Control Systems
  • GE IS200AEADH1ABA - Precision Engineered Speedtronic Turbine Control PCB Board
  • GE 489-P1-HI-A20-E - Generator Management Relay Advanced Protection for Critical Power Systems
  • GE DS3820AIQA - Advanced Industrial Communication Module
  • GE FANUC - DS200SLCCG3A Advanced Communication Card for Industrial Control Systems
  • GE 12BDD15B11A - Relay Transformer Industrial Automation Solutions
  • GE Fanuc - 531X307LTBAJG1 Industrial PLC Module
  • GE 194B5705G1 - RELAY OPTION ASSEMBLY High-Quality Relay Module for Industrial Automation
  • GE Fanuc - IC695CMX128 Reflective Memory Module Industrial Control Solutions
  • GE IS200TRPAH1AFC - Industrial I/O Module for Enhanced Control Systems
  • GE A98L-0031-0026 - Battery
  • GE IS200SCLTH1A - Advanced Turbine Control System
  • GE IS200ERGTH1A - Regulator Options Card
  • GE IC220STR003 - Industrial Control Module
  • GE IS2020DRLYH1AA - Relay Board
  • GE DS3800XAIA1A1A - Circuit Board Industrial Automation Solutions
  • GE IS200BICMH1AAA - Advanced Digital Relay Output Module for Industrial Control Systems
  • GE GGN32L4XXMFXXXX - High-Performance 3200A EntelliGuard TU Trip Unit
  • GE IS420ESWBH - IS420ESW Fiber Ethernet Switches
  • GE IC694MDR390 - Advanced Mixed I/O Module for Industrial Automation
  • GE IC200CHS022 - Carrier Module High-Performance PLC Component for Industrial Automation
  • GE FANUC - SR750 Series
  • GE IS200TSVCH1A - Servo Terminal Board
  • GE IC3600AIAD1C1D - Advanced MKII Turbine Control Card
  • GE Fanuc - IC200PNS001 PROFINET SCANNER MODULE Precision in Industrial Automation
  • GE DS200TCDAG1ADA - Advanced Digital I/O Board for Industrial Control Solutions
  • GE IC200PWR101 - High-Performance Power Supply Module
  • GE SR750-P5-G5-S5-HI-A20 - RE Advanced Industrial Control Module
  • GE IS210AEBIH3BEC - Advanced Turbine Card
  • GE Fanuc - IC200ALG331 Versamax PLC
  • GE IC695HSC304 - High Speed Counter Module
  • GE Fanuc - 369B1868G0008 Industrial PLC
  • GE UR - 9NH CPUUR PLC Card
  • GE IS220PD0AH1A - Advanced Communication Input/Output Module
  • GE IC3600ATAD1B - Advanced Control Circuit Board
  • GE IS220PDIAH1AD - High-Performance PLC I/O Pack
  • GE 6231BP10820C-E - / GE 6231BP10830C-B; Producer GE-FANUC
  • GE Fanuc - 8002-CC-85 Extension Cable Advanced Industrial Control Module
  • GE IC3600VMPA1E - Advanced Mechanical Protective Card for Industrial Control Systems
  • GE IC200GBI001 - Genius Network Interface Unit High-Speed Data Transfer Solution
  • GE DS200SDCCG4A - Advanced Process Control Module for Industrial Automation
  • GE FANUC - IC693BEM341 Advanced FIP Bus Controller for Industrial Automation
  • GE Electric - HE693STP101E High-Performance Control Module for Industrial Automation
  • GE IS200STCIH2AED - Advanced Power System Circuit Board for Industrial Automation
  • GE Series - IC670MDL930 Relay Output Module High-Power