Welcome to the Industrial Automation website!

Product
Article
NameDescriptionContent
HONG  KANG
E-mail  
Password  
  
Forgot password?
  Register
HOME ⊙ xYCOM ⊙ PRO-FACE XYCOM 1546 Heavy Industrial PC 1546-1120310130001
当前位置：

PRO-FACE XYCOM 1546 Heavy Industrial PC 1546-1120310130001

来源: | 作者:FAN | 发布时间 :2025-05-30 | 430 次浏览: | Share:
PRO-FACE XYCOM 1546 Heavy Industrial PC 1546-1120310130001
Product Overview

The 1546 and 1547 Node Box Industrial PCs offer a powerful, compact package for the factory floor and other harsh environments.  

These node box industrial PCs feature an open architecture to meet a wide variety of applications that require both a powerful PC and a durable industrial enclosure. 

The systems integrate a computer card cage, mass storage, and power supply in a truly industrial form.

The processor board combines all the functions of a complete PC/AT® compatible computer on a single industrially hardened circuit board.  


Standard Features  

The 1546 and 1547 units come standard with the following features:
AIM4 board
Wall or shelf mountable
Flash BIOS
SATA HD controller for up to 2 drives
Removable 40 GB SATA hard drive(s), rear access
AGP Video Controller, 4M of system DRAM, up to 32M
PCI local bus IDE controller (for CD/DVD and CF options)
Two 240 pin DDR2 DIMM sockets that support 256MB, 512MB, 1GB and 2GB options
Intel® Socket 478 Celeron® M or Pentium® M options up to 2.0GHz 400MHz or 533MHz front side bus depending on the processor type 1546 – Four AT bus expansion slots  
One PCI (8.0” max)
One PCI (9.0” max)
One ISA (9.0” max)
One PCI or ISA slot (9.0” max)
1547 – Four AT bus expansion slots  
One ½ length PCI
One full length PCI
One full length ISA
One full length PCI or ISA slot
IBM® PS/2® keyboard port and mouse port
Four serial COM ports, with three external ports configured as RS-232 and one
configurable as either RS-232 or RS-422 or RS-485. The fourth port is an
internal header only and defaulted as disabled.


Parallel port  

VGA port
Four USB 2.0 ports
Legacy USB keyboard and mouse support
Legacy USB floppy, USB CDROM, and USB mass storage support
Two onboard Ethernet ports, one is a 10/100 BASE T and the other is 10/100/1000 BASE T
Microsoft Windows XP® operating system
Internal rear access Compact Flash (CF) interface 120/240 VAC 50/60Hz Auto switching power supply
UL Listed for use in Class I and Class II, Division 2 hazardous locations, Groups

A, B, C, D, F, and G

Optional Features

Following are optional available features of the 1546 and 1547:
Higher capacity SATA hard drives and solid state drives  

Various CD/DVD drive options
Internal rear access floppy
Various processor speeds
Preinstalled Windows® 2000, or Windows XP® Professional
External 9000-USBF, USB floppy (requires Windows 2000, or XP)
CompactFlash™ options up to 4GB
2.5” Dual hard drives
2.5” RAID array support
24VDC power supply (on 1547 units only)
The figures and tables on the next several pages illustrate the internal and external components on the front and back panels of the unit to help you locate the features of the 1546 and 1547 Node Boxes.


Unpacking the System

When you remove the system from its shipping container, verify that you have the parts listed below. 

Save the box and inner wrapping in the event you need to reship the unit.


1546 or 1547 unit
Documentation kit, which includes:
Power connector
Cable clamp and screw (for strain relief of power cord)
Documentation and Support Library CD-ROM
Operating System Recovery Media or retail operating system (CD-ROM)


Mounting hardware

The rugged design of the 1546 and 1547 Node Boxes allows it to be installed in most industrial environments. 

The system is generally placed in a NEMA 4/4X/12 enclosure to protect against contaminants such as dust, and moisture. 

Metal enclosures also help minimize the effects of electromagnetic radiation that nearby equipment can generate.  

For Underwriters Laboratories (UL) compliance, the unit must be installed within a suitable fire enclosure.

Read the following sections carefully to be sure that you are complying with all the safety requirements.
Select a NEMA rated enclosure and place the unit to allow easy access to the system ports (see other sections in this chapter and Appendix A).
To assure a NEMA 4 seal choose an approved enclosure that has a 14-gauge (0.075 in/1.9 mm thick steel or 0.125 in/3.2 mm thick aluminum) front face.
Be sure to account for the unit’s depth when choosing the depth of the enclosure.
Create a mounting location in the enclosure (see System Mounting Dimensions).
Be sure to place the unit at a comfortable working level
Make sure the area around the mounting location is clean and free from metal burrs
Mount the unit position and properly secure the unit into the panel.
Tighten the fourteen #10 screws to 20 inch-pounds (2.597 Newton-meters /23Kgf cm).
Construct a power cable following the instructions in AC Power Cable in this chapter..
Attach one end of the power cord to the power receptacle on the unit and the other end to a properly grounded 115/230 VAC, 50-60 Hz outlet.
A ground path from the unit chassis to the enclosure chassis can be established using the 6-32 threaded ground point hole provided on the bottom panel of the unit
Turn on power to the system. The system will boot up the installed operating system.
Install the application software via a floppy drive, CD-ROM, or the network.
Additional aspects to take into account when mounting your 1546 and 1547 Node
Boxes:
Consider locations of accessories such as AC power outlets and lighting (interior lighting and windows) for installation and maintenance convenience
Prevent condensation by installing a thermostat-controlled heater or air conditioner
To allow for maximum cooling, avoid obstructing the airflow

Place any fans or blowers close to the heat generating devices. 

If using a fan, make sure that outside air is not brought into the enclosure unless a fabric or other reliable filter is used. 

This filtration prevents conductive particles and other harmful contaminants from entering the enclosure.

Do not select a location near equipment that generates excessive electromagnetic interference (EMI) or radio frequency interface (RFI). 

Examples of these types of equipment are: high power welding machines; induction heating equipment;and large motor starters.

Place incoming power line devices (such as isolation or constant voltage transformers, local power disconnects, and surge suppressers) away from the

system. 

The proper location of incoming line devices keeps power wire runs as short as possible and minimizes electrical noise transmitted to the unit.

Make sure the location does not exceed the unit’s shock, vibration, and temperature specifications
Install the unit in the rack or panel in such a way as to ensure that it does not cause a hazard from uneven mechanical loading
Incorporate a readily-accessible disconnect device in the fixed wiring on permanently connected equipment


Avoid circuit overloading of the supply circuit

Power Management
The following paragraphs explain the system power, the power supply, and the effects of excessive heat, electrical noise, and line voltage variation of the 1546
and 1547 Node Boxes.

System Power  

Using isolation transformers on the incoming AC power line to the system is always a good practice. An isolation transformer is especially desirable in cases in
which heavy equipment is likely to introduce noise onto the AC line.  
The isolation transformer can also serve as a step-down transformer to reduce the incoming line voltage to a desired level. The transformer should have a sufficient power rating (units of volt-amperes) to supply the load adequately.

Proper grounding is essential to all safe electrical installations. 

Refer to the relevant Federal, State/Provincial, and local electric codes, which provide data

such as the size and types of conductors, color codes and connections necessary for safe grounding of electrical components. 

The code specifies that a grounding path must be permanent (no solder), continuous, and able to safely conduct the ground-fault current in the system with minimal impedance (minimum wire required is #18 AWG, 1 mm).

Observe the following practices:

Separate ground wires (P.E. or Protective Earth) from power wires at the point of entry to the enclosure. 

To minimize the ground wire length within the enclosure,locate the ground reference point near the point of entry for the plant power supply.

All electrical racks or chassis and machine elements should be Earth Grounded in installations where high levels of electrical noise can be expected. 

The rack/chassis should be grounded with a ground rod or attached to nearby Earth structure such as a steel support beam. 

Each different apparatus should be connected to a single Earth Ground point in a “star” configuration with low impedance cable. 

Scrape away paint and other nonconductive material from the area where a chassis makes contact with the enclosure.  

In addition to the ground connection made through the mounting bolt or stud, use a one-inch metal braid or size #8 AWG wire to connect between each chassis
and the enclosure at the mounting bolt or stud.

  • ABB FAZ-C2/2-DC Circuit Breaker
  • ABB FAZ-XHIN11 auxiliary contact equipment
  • ABB Z-NTS neutral wire circuit breaker
  • ABB M3V4-1/0-0 64122088 Input/Output Module
  • ABB NDBU-95C 64008366D control module
  • ABB LWN2660-6EG Automation Control Module
  • ABB LWN2660-6E power supply
  • ABB FPX86-9377-A capacitor
  • ABB MR627 P89627-0-2333400-300-401-601-701 Motor Control Unit
  • ABB 57619414 A 1/2 connector module
  • ABB 57619414 A 2/2 connector module
  • ABB LDMTR-01 63940135F Input/Output (I/O) Module
  • ABB LDSTA-01 63940143B Input/Output (I/O) Module
  • ABB CRBX01 2VAA008424R1 Remote Bus Expander
  • ABB UNITRAL1010 3BHE035301R1002 UNS 0121A-Z, V1 high-performance excitation controller
  • ABB UNITRAL1010 3BHE035301R0001 UNS 0121 A-Z, V1 brushless excitation system
  • ABB CHBX01R 2VAA008575R1 Compact Bus Expander
  • ABB CHBX01L 2VAA008574R1 Bus Expander
  • ABB RMU610 2VAA008425R1 redundant communication module
  • ABB 3BUS208796-501 Communication Module
  • ABB 128057-204 086345-504 multifunctional module
  • ABB HIEE205014R1 HI220856-312/20 UNC4673AV1 redundant controller
  • ABB PP882 3BSE069275R1 Control Panel
  • ABB AC800M PM891 3BSE053240R1 Controller Module
  • ABB AC900F PM904F 3BDH0001002R0001 Controller
  • ABB P8151B communication interface module
  • ABB P8403C controller module
  • ABB P8431 controller module
  • ABB Y129740-002 Analog Module
  • ABB PFTL201D 100KN 3BSE008922R0100 Tension Sensor
  • ABB PPD117A3011 3BHE030410R3011 Excitation Controller
  • ABB PPD512A10-454000 3BHE040375R103E Static Excitation System Unit Module
  • ABB 3BHE046836R0101 GFD563A101 Interface Module
  • ABB 3BHE023784R2530 PPD113B01-25-111000 Controller Module
  • ABB PFCL201CE 50KN 3BSX802939-108 Tension Controller
  • ABB LS4000 diode laser analyzer
  • ABB REM615 HBMBCCAHNB1NN1XD Motor Protection Control
  • ABB 3BHE017628R0002 PPD115A02 SG579989013 Controller Module
  • ABB G2000A5.7ST human-machine interface
  • ABB DKTFM418B 3BHB015651P0001 Controller
  • ABB 3BHE039724R0C3D PPD513 A0C-100440 AC800PEC Controller
  • ABB PPD513AOC -100440 3BHE039724R0C3D 800 D513 Integrated Gate Commutator Transistor (IGCT)
  • ABB XUD194 XUD194A 3BHC018137R0001 Controller Unit Module
  • ABB UDC920BE01 3BHE034863R0001 High Voltage Inverter
  • ABB PPD517A3011 3BHE041576R3011 Excitation Controller
  • ABB MT-91-ARC FP A Control Panel
  • ABB UAC383AE01 HIEE3008900001 interface module
  • ABB XVC722AE101 3BHB002751R0101 High Performance Industrial Control Module
  • ABB TB820V2 3BSE013208R1 Modulebus Cluster Modem
  • ABB 3BHE003604R0102 UFC765AE102 circuit board
  • ABB SPSED01 High-Performance SOE DI Module
  • ABB GFD233A103 3BHE02294R0103 multifunctional control machine
  • ABB DO810 3BSE008510R1 Digital Output Module
  • ABB PM866A 3BSE076359R1 Process Controller
  • GE P111-6053 Advanced Microcontroller
  • GE SPU232.1-CAN PART NO: 029.354 630. Industrial grade module
  • ALSTOM VCM 232.2 029.359 088 VME-MANAGER-MASTER 0085.022.99
  • ALSTOM Centrol Unit COP 232.2 029.232 446
  • ABB PPD539A102 3BHE039770R0102 Control System Module
  • ABB UFC921A101 3BHE024855R0101 Digital Control Module
  • ABB UFC911B106 3BHE037864R0106 Voltage Measurement Board
  • ABB 5SHY4045L0006 3BHB030310R0001 IGCT module
  • ABB HIEE300024R4 UAA326A04 control module
  • ABB PPC905AE101 3BHE014070R010 Controller Module
  • ABB CDP-312R CONTROL PANEL
  • ABB TPPB-02 Control Processor Module
  • ABB UFC762AE101 3BHE006412R0101 motor control interface
  • ABB 1TGE120020R0614 industrial control module
  • ABB UFC760BE145 3BHE004573R0145 High-Voltage Interface Board
  • ABB XVC768116 3BHB007211R116 Programmable Controller
  • ABB XVC767AE105 3BHB007209R0105 Current Monitoring Board
  • ABB PCS6000 VLM70 3BHE034262R0001 Medium-Voltage Converter Module
  • ABB FPX86-9364-A controller motherboard
  • ABB FPX86-9345-B 3BHL000986P0006 Controller Module
  • ABB S-053M 3BHB012897R0003 Phase controller module
  • ABB 3BHE05077R0102 UNS0881b-PV2 control board
  • ABB VIPA972-0DP01 bus connector
  • ABB HS810 3BDH000305R0101 Controller Module
  • ABB PF900-NR 3BDH000357 power module
  • ABB 3BHB005245R0101 power board
  • ABB SUE3000 1VCR007346 G0032 Synchronous Motor Exciter
  • ABB SUE3000 1VCR007346 G0028 High speed Transmission Equipment
  • ABB UFC921A 3BHE024856P106 Communication Module
  • ABB GMKP2800-32IBY Communication Module
  • ABB PS203PRESSPMPPS Intelligent Control Module
  • ABB UNS4681V511 3BHE004074R0511 Expansion Unit Module
  • ABB PFTL101B 10KN 3BSE004197R1 high-performance weighing sensor
  • ABB CI532V02 3BSE003B27R1 Communication Module
  • ABB COM0034 control module
  • ABB 216VC626/P1000 HESG324442R112 processor unit relay card
  • ABB 216MB66 HESG324510M1 PLC Memory Expansion Module
  • ABB SPAJ140C overcurrent and ground fault relay
  • ABB DI840 3BSE020836R1 Digital Input Module
  • ABB AI845 3BSE023675R1 Analog Input Module
  • ABB B5LA HENF327886R0001 DC power module
  • ABB P7LA HNEF105323R0002 High Performance Control Module
  • ABB PPC322AEV01 HIEE300697R1 excitation control board
  • ABB REF620C_F NCFNAAAAABC2DNN1XF Feeder Protection and Control
  • ABB P72140-4-0788740 CTI21-P Input/Output Module
  • ABB DYTP123A 61430001-TW Ethernet Connection Module
  • ABB DYSF118B 61430001-XG Communication Interface Module
  • ABB DYPS154C 61430001-YP Serial Communication Module
  • ABB DTCC901B 61430001-FU Ethernet Communication Module
  • ABB SB510 3BSE000861R1 Backup Power Supply 110/230V AC
  • ABB CI535V26 3BSE022161R1 Communication Interface Module
  • ABB RAO02 redundant analog output module
  • ABB RAI02J redundant analog input module
  • ABB 1MRK002133-ABr02 analog-to-digital module
  • ABB UNITRAL1010 3BHE035301R0004 voltage regulator
  • ABB 3BHB019265R0410 Analog Input/Output (I/O) Module
  • ABB UNC4672AV1 HIEE205012R1 multi-functional input/output analog module
  • ABB REC650 1MRK008514-CB multifunctional circuit breaker
  • ABB RER 103 bus connection module
  • ABB REF545KB133AAAA High Performance Protection Relay
  • ABB REC670 1MRK002814-AC High-Performance Relay Module
  • ABB DASD001 3ASC25H241 Industrial Digital Input Module
  • ABB RED670 touchpad film
  • ABB NTAC-02 fiber optic cable
  • ABB XVC768AE102 3BHB007211R0102 Analog Input Module
  • ABB AD02 multi-channel integrated I/O module
  • ABB TU842 3BSE020850R1 module terminal unit
  • ABB APBU-44C 64669982 High Performance Controller Module
  • ABB REM611 panel
  • ABB RED615 panel
  • ABB L003748-AR 3BSX108237R300 Voltage Regulating Control Module
  • ABB COM0034 2RCA023019A0004C control module
  • ABB REU615E-D HBUAEAADNCA1BNN1XD Voltage Protection and Control Relay
  • ABB S-113H 3BHB01808R0003 Hydraulic Control Module