GE Multilin 269PLUS-D/O-211-100P-HI Relay Industrial Motor Protection System

269PLUS-D/O-211-100P-HI Relay Industrial Motor Protection System

Protection Against:Overloads, Undercurrents, Stator Winding Overtemperature, Bearing Overtemperature Input Current Range:1A  1000A Operating Temperature:-40"C to +70"C Relay Type:DC Number of Channels:3 Mounting Type:Panel Mount Power Supply Voltage:24VDC Communication Protocol:Modbus RTU Unmatched Reliability The GE MULTILIN 269PLUS-D/O-211-100P-HI Relay is built with robust materials and advanced circuitry to withstand harsh industrial environments, ensuring reliable performance over long periods. Customizable Settings This relay allows users to customize settings via the order code to fit specific motor requirements, providing versatile solutions for various industrial applications. 

 Alarm and Monitoring It features an alarm relay function that triggers when protective limits are exceeded, allowing immediate intervention to prevent potential damage or downtime. Ease of Integration With support for Modbus RTU communication protocol, integrating the GE MULTILIN 269PLUS-D/O-211-100P-HI Relay into existing control systems is straightforward, enhancing system efficiency. In Stock and Ready to Ship AX Control maintains an inventory of this model, ensuring prompt delivery and minimal downtime for your operations. The GE MULTILIN 269PLUS-D/O-211-100P-HI Motor Relay offers advanced protection and control for AC motors in industrial applications, ensuring reliability and safety in critical operations.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module