531X305NTBAPG1 | General Electric NTB/3TB Terminal Board

531X305NTBAPG1 | General Electric NTB/3TB Terminal Board

Product Description P/N: 531X305NTBAPG1 DESCRIPTION / SPECIFICATIONS Description The 531X305NTBAPG1 is an NTB/3TB terminal board developed by General Electric, designed as part of the 531X series replacement drive boards. It is compatible with various drives within the GE brand, enhancing functionality by providing access to additional interfacing capabilities not typically present in the drives themselves. 

 Technical Specifications Part # 531X305NTBAPG1 Category Drives Subcategory Drive Board Manufacturer General Electric Product Type NTB/3TB Terminal Board Series EX2000 Information About 531X305NTBAPG1 The 531X305NTBAPG1 NTB/3TB terminal board, developed by General Electric, is part of the 531X series designed specifically for replacing drive boards within the GE brand. This board family offers versatile compatibility across various GE drives, augmenting them with enhanced interfacing capabilities not typically intrinsic to the drives themselves. Upon installation, the NTB/3TB terminal board facilitates access to a range of interfacing tools essential for diverse industrial applications. These tools encompass serial and relay outputs, low-level analog input/output (I/O), encoder interfaces, and power supply functionalities. 

 Functionally, the terminal board accommodates both regulated and unregulated power sources. Regulated supplies deliver at 5 VDC and 15 VDC, while unregulated options provide 24 VDC or 120 VAC, allowing the host drive to adapt power configurations based on operational demands. Users have the flexibility to adjust board settings to meet specific load requirements, ensuring optimal performance across varying operational contexts. Manufacturer information General Electric (GE)is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.

 IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module