ABB CA-GJR5250200R1 07SK90R1 Programming Cable - 5 meters

ABB CA-GJR5250200R1 07SK90R1 Programming Cable - 5 meters

Basic information

Model and system: The programming cable CA-GJR5250200R1 is suitable for ABB Advant Controller 31, Advant OCS and other systems, and is an important tool for programming and commissioning the equipment in these systems.

Place of origin and dimensions and weight: The place of origin is Germany and the place of shipment is Webster, New York, USA. The dimensions of the cable are approximately 7.0 inches × 2.0 inches × 8.0 inches (i.e., 17.8 cm × 5.1 cm × 20.3 cm) and the weight is approximately 0.2 kg.

Performance Features

Transmission stability: as a programming cable, it can stably transmit programming data and instructions to ensure the accuracy and integrity of data during programming and debugging of ABB equipment, reducing programming failures or equipment failures caused by data transmission errors.

Anti-interference ability: In the industrial environment, there are various sources of electromagnetic interference, such as motors, frequency converters and other equipment generated by electromagnetic noise. The cable has good anti-interference ability, can effectively shield the external electromagnetic interference, to ensure the purity of the programming signal, so as to ensure that the programming operation is carried out smoothly and improve work efficiency.

Reliability of connection: A reliable connection interface is adopted, which can be firmly connected to the corresponding equipment and programming equipment to prevent data interruption or loss due to loose connection in the programming process. The interface design complies with the relevant standards, has good compatibility and universality, and is convenient for users to use.

Application Areas

Industrial automation system programming: In industrial automation production lines, it is used for programming and debugging various ABB controllers, PLCs and other devices. For example, in the automated production line of an automobile manufacturing plant, engineers can use the programming cable to connect the programming software with the controller in the production line to write and debug the motion control programme of the robot and the logic control programme of the production equipment, etc., so as to ensure the normal operation of the production line.

Equipment maintenance and upgrading: In the process of equipment maintenance and upgrading, technicians can use the programming cable to modify and optimise the control program of the equipment. For example, when the production process changes or the equipment needs to add new functions, you can use this cable to connect the equipment and programming tools to make corresponding adjustments to the equipment's programme to meet the production requirements, extend the service life of the equipment, improve the performance and productivity of the equipment.

FEATURES

• Process Station with integrated fieldbus  capability  

• 4 high-speed fieldbus lines  

• Supports different fieldbus types, even  simultaneously:  PROFIBUS-DP, up to 12 MBd  Modbus  CAN  Foundation Fieldbus H1 (with LD800  HSE)  

• Easy engineering:  fully integrated in Control Builder F  

• One unified database for field devices  shared by the control level and the Human  System Interface (HSI)  

• Module recognition with factory and operational parameters  

• Comprehensive diagnostics for proactive  maintenance  

• Compact, rugged design  

• Front panel connectors  

• DIN Rail (C-rail) or wall mounting for easy  installation  

• Ambient temperature 0-60 °C (32-140 °F)  with temperature monitoring  

• EMC certification according to EN50082  

• Certification:  CE, NAMUR, CSA, UL, EN61000-6-2.

The AC 800F is available in two versions:  

• 4 MB static RAM, 4 MB EPROM  

• 16 MB synchronous dynamic RAM,   8 MB EPROM

The AC 800F optionally provides several levels  of redundancy: 

• device redundancy with 2 AC 800F  

• power supply redundancy (24 V DC)  

• Ethernet communication redundancy   (standard)  

• Cable redundancy for Profibus DP,   requires external equipment (RLM01)