GE DS200TCEBG1B Common Circuits for EOS Board

GE DS200TCEBG1B Common Circuits for EOS Board

Part Number DS200TCEBG1B Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark V Function Module Availability In StockDS200TCEBG1B is a Protective Termination Expander Board and is part of the GE Speedtronic Mark V gas turbine control system. This board is located in the P1 Core location 2, Scales the potential transformer and current transformer used by the TCCB boards in the R5. These signals are used for the generator and bus voltages and line current and are landed on the PTBA terminal board. There are no hardware jumpers on the TCEB board for the configuration. The alarm horn jumper is located on the PTBA terminal board. There is no software configuration on the TCEB board.

DS200TCEBG1B (GE Protective Termination Expander Board) features 3 bayonet connectors, 4 signal transformers, one 26-pin connector, four 10-pin connectors and three 20-pin connectors. DS200TCEBG1B (Mark V series) diagnostic tools are limited, although, you can use the available diagnostic tools on the drive to understand the board and all components in the drive. DS200TCEBG1B (Mark V series) diagnostics will generate a report that includes all warning, error and trip conditions generated by the drive.nnThe diagnostic report of DS200TCEBG1B (Mark V series) also includes the details of the boards in the drive. From DS200TCEBG1B?s report, you can find the cause of the problem and how to resolve the issue. 

Through a serial cable, you can upload the report to a laptop that is connected to the drive.?nnDS200TCEBG1B (Mark V series) is located in the core. DS200TCEBG1B holds the microprocessor circuitry for the protection of DS200TCEBG1B (Mark V series), the DS200TCEBG1B (Mark V series) being known as the protective processer.?nnDS200TCEBG1B (GE Protective Termination Expander Board) scales the PT and CT signals used by the TCCB board, which are used for the generator, bus voltages and line current, which are then landed on the PTBA terminal board.

OTHER INFORMATION

Hardware Tips and Specifications

The General Electric Protective Termination Expander Board model DS200TCEBG1B features a complete total of 3 bayonet connectors, 4 signal transformers, and 1 26-pin connector. It also contains 4 10-pin connectors and 3 20-pin connectors. The GE Protective Termination Expander Board DS200TCEBG1B is limited in the diagnostic tools available if you suspect that the board is not operating as you expected. However, you can use the diagnostic tools available on the drive to gain insight into the board and all components in the drive. The diagnostics generate a report that details all warning, error, and trip conditions generated by the drive. The various connectors made available to the assembly of this DS200TCEBG1B Protective Termination Expander Board are described in detail in the DS200TCEBG1B instructional manual attached above, for your convenience. As with any individual hardware component in this DS200TCEBG1B printed circuit board product offering's assembly, this DS200TCEBG1B PCB's connectors are all identifiable through their own individual corresponding factory-printed nomenclature labels. Some of this DS200TCEBG1B PCB's various connectors include:

The JKX/Y/Z TCEA Board Various Signals Connector

The JMP TCCB Board PT and CT Signals Connector

The JU PTBA Board Magnetic Pickup and Flame Detection Signals Connector

The JV PTBA Board PT and CT Signals Connector

The JVA PTBA Board UV Flame Detection Signals Connector

The JWX/Y/Z TCEA, TCEB, and PTBA Boards 335 V dc Signals Connector

The JPU Connector

The JPV Connector

The JPW Connector

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is used only under appropriate conditions and in a condition fully suitable for use.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.