GE-FANUC IC200ALG264A VersaMax PLC

GE-FANUC IC200ALG264A VersaMax PLC

Model:IC200ALG264A Type:Versamax PLC Module Series:GE Fanuc Module Type:Digital Input Input Voltage Range:DC 24V Number of Inputs:16 Operating Temperature:-20"C to +60"C Humidity Range:5% to 95% non-condensing Dimensions:6.8 cm x 4.3 cm x 2.5 cm Weight:100 g Communication Protocol:MODBUS RTU Power Consumption:Less than 1.5 W The GE Fanuc IC200ALG264A is engineered with precision and reliability, making it an indispensable component in modern industrial control systems. Featuring advanced digital input capabilities, this module ensures accurate data acquisition and response times, crucial for seamless operation in diverse manufacturing environments. 

 With a temperature resistance from -20"C to +60"C and a humidity tolerance up to 95% without condensation, it  built to withstand harsh industrial conditions, ensuring reliable performance under extreme circumstances. Designed with a compact footprint of just 6.8 cm x 4.3 cm x 2.5 cm and a lightweight structure of 100g, the IC200ALG264A is easily integrated into existing control panels, minimizing space requirements and facilitating efficient setup. Equipped with MODBUS RTU communication protocol, this module seamlessly integrates with other PLCs and SCADA systems, enhancing system interoperability and data exchange capabilities. The GE Fanuc IC200ALG264A is a high-performance Versamax PLC module designed for precise control and automation tasks across various industrial applications.

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).