GE IC693CMM311 Advanced Communication Coprocessor Module, Designed for Industrial Automation

IC693CMM311 Advanced Communication Coprocessor Module, Designed for Industrial Automation

Product Type:Communications Coprocessor Module Mounting:Baseplate mounted Number of Serial Ports:2 Current Load:400 mA Operating Voltage Range:5 to 30 Volts DC or 5 to 250 Volts AC Form Factor:Single Slot Integrating cutting-edge technology, the GE IC693CMM311 Control Module is engineered to meet the demanding requirements of industrial automation environments. 

 This module boasts a robust design, featuring two serial ports for efficient data communication, ensuring reliable operation in critical systems. Designed for baseplate mounting, it seamlessly integrates into existing systems without compromising on space or performance. Capable of handling a current load of up to 400 mA, it supports a wide range of applications, enhancing system flexibility and scalability. With its single slot width, the module ensures compatibility with a variety of control systems, facilitating easy installation and maintenance. Optimized for industrial automation, the GE IC693CMM311 Control Module is an essential upgrade for any facility aiming to boost efficiency and productivity. The GE IC693CMM311 is an advanced communication coprocessor designed for seamless integration into complex industrial control systems, enabling enhanced data transfer capabilities.

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).