IC693CMM321 Ethernet Interface Module for Industrial Automation
Product Type:Ethernet Interface Module Connection Accessories:AAUI Cable Number of Ports:3 Module Width:Single Slot Interface Speed:100Base-TX Power Supply:5 V DC from the Series 90-30 Backplane Operating Temperature:-10"C to 55"C Humidity Range:5% to 95% non-condensing Certifications:CE, UL, CSA The GE IC693CMM321 Ethernet Interface Module is a critical component in modern industrial automation systems. Designed by General Electric (GE), this module offers superior performance and reliability for critical applications. Its primary function is to facilitate efficient communication and data exchange within complex industrial networks.
With its robust design, it can withstand harsh industrial environments, ensuring long-term stability and minimal downtime. The module supports up to three ports, providing flexibility in network configuration. Additionally, it integrates seamlessly with the Series 90-30 backplane, making it an ideal choice for upgrading existing systems or integrating new components into a larger automation setup. The GE IC693CMM321 is an advanced Ethernet Interface Module designed for high-performance industrial control systems. It enables seamless communication between GE Series 90-30 PLC systems and other network devices, making it ideal for modern automation applications.
Features
▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user memory.
▪ Provides access to bulk memory via reference table %W.
▪ Configurable data and program memory.
▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram.
▪ Supports auto-located Symbolic Variables that can use any amount of user memory.
▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for analog %AI and %AQ.
▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223.
▪ Supports all VME modules supported by Series 90-70.
▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server and FTP connections.
▪ Supports up to 512 program blocks. Maximum size for a block is 128KB.
▪ Test Edit mode allows you to easily test modifications to a running program.
▪ Bit-in-word referencing.
▪ Battery-backed calendar clock.
▪ In-system upgradeable firmware.
▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232 Ethernet station manager serial port.
▪ The embedded Ethernet interface provides:
- Data exchange using Ethernet Global Data (EGD)
- TCP/IP communication services using SRTP
- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client
- Full programming and configuration services
- Comprehensive station management and diagnostic tools
- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network switch providing auto-negotiated network speed, duplex mode, and crossover detection.
- User-configurable Redundant IP address
- Time synchronization to SNTP time server on Ethernet network (when used with Release 5.00 or later CPU module).
email:1583694102@qq.com
wang@kongjiangauto.com