GE IC693MDL741 Digital I/O Module PLC Extended

GE IC693MDL741 Digital I/O Module  PLC  Extended

Product Type:Digital I/O Module Module Circuit Type:Sourcing Number of Channels:16 Output Voltage Range:12 to 24 volts DC No. of Groups:2 Module Input Voltage:5 Volts DC Certification:Compliant with industry standards for reliability and safety The GE IC693MDL741 is engineered to withstand the rigors of industrial environments, featuring a compact yet robust design that ensures reliability and durability in challenging conditions. With a wide range of 12 to 24 volts DC for positive logic outputs, it seamlessly integrates into a variety of control systems, offering flexibility and compatibility across different industrial applications. Each channel is equipped with advanced circuitry that enhances signal integrity and reduces noise interference, ensuring accurate data transmission even under fluctuating conditions. 

 The module  modular design allows for easy expansion and customization, enabling users to tailor the system to their specific needs without compromising on performance. The IC693MDL741 comes with a series of customizable jumpers, providing users with the ability to fine-tune the module to match their application requirements precisely, enhancing operational efficiency and reducing downtime. The GE IC693MDL741 is a positive logic output module designed for digital input/output operations within Programmable Logic Controller (PLC) systems, offering efficient control and monitoring capabilities in industrial automation environments.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module