GE Fanuc IC694MDL231 Isolated Input Module Industrial Automation Precision

GE Fanuc IC694MDL231  Isolated Input Module Industrial Automation Precision

Type:Isolated Input Module Model:IC694MDL231 Technology:Analog Input Channels:16 Isolation Rating:2500V AC Input Voltage Range:10VDC to 30VDC Operating Temperature:-40"C to +85"C Power Consumption:0.15W Dimensions:98mm x 100mm x 140mm Weight:160g Communication Protocol:RS-485 This isolated input module from GE Fanuc is engineered for demanding industrial environments, providing robust signal conditioning capabilities. It ensures accurate data acquisition and processing in complex control systems. Featuring high isolation ratings, this module safeguards against electrical noise and ground loops, ensuring stable operation even in harsh industrial settings. 

 The module supports both voltage and current inputs, offering versatility in signal measurement. It  compatible with various types of sensors and actuators commonly used in automation applications. With its compact design and low power consumption, the IC694MDL231 is easy to integrate into existing control systems without significantly impacting the overall power budget or physical space constraints. This product is part of the renowned GE Fanuc family, known for its reliability and compatibility with a wide range of industrial automation products. 

It adheres to stringent quality standards, backed by extensive testing and certification. Ideal for applications requiring precise signal management, such as process control, manufacturing automation, and data acquisition systems, the IC694MDL231 is a critical component for enhancing system accuracy and efficiency. The GE Fanuc IC694MDL231 Isolated Input Module is designed for industrial signal conditioning, ensuring reliable and accurate data transmission. Ideal for harsh environments, it offers high-speed signal processing capabilities, making it a critical component in automation systems. 

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module