General Electric IC697VRD008 A Robust Controller Module for Industrial Automation Solutions

General Electric IC697VRD008 A Robust Controller Module for Industrial Automation Solutions

Model Number:IC697VRD008 Type:Controller Module Technology:Advanced Microprocessor Technology Operating Voltage:12-24V DC Input Capacity:16 Digital Inputs Output Capacity:8 Digital Outputs Communication Interface:RS-485 Serial Communications Environmental Rating:IP20 Protection Operating Temperature Range:-20"C to +60"C Dimensions:105mm x 50mm x 54mm Weight:0.1kg Introducing the General Electric IC697VRD008 Controller Module, engineered for unmatched efficiency in modern industrial environments. This compact yet powerful module is equipped with a high-performance microprocessor, ensuring swift and accurate data processing. 

 With 128K bytes of RAM, the IC697VRD008 boasts ample memory capacity to handle complex operations and large datasets, enhancing productivity and reliability. Featuring 8 digital input and 8 digital output channels, this module provides extensive connectivity options, enabling seamless integration with various industrial devices and systems. Equipped with a robust 24V DC power supply, the controller ensures stable operation under diverse conditions, guaranteeing uninterrupted performance. Supporting advanced communication protocols such as Ethernet/IP and DeviceNet, the IC697VRD008 facilitates easy connectivity and data exchange within the industrial network, streamlining automation processes and enhancing system interoperability. The General Electric IC697VRD008 Controller Module is a critical component in industrial automation systems, designed to offer seamless control and monitoring in demanding environments. 

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module