General Electric IS200STAIH2A Analog I/O Terminal Board, Industrial Control Module

General Electric IS200STAIH2A Analog I/O Terminal Board, Industrial Control Module

Brand:General Electric Model:IS200STAIH2A Type:Analog I/O Terminal Board Module Category:Control Input Current Range:0-20 mA, 4-20 mA Output Voltage Range:0-10 V, 0-24 V Power Supply Voltage:24 VDC Communication Interface:RS-485 Operating Temperature:-20"C to +70"C Relative Humidity:5% to 95% non-condensing Size (W x H x D):166mm x 114mm x 58mm Weight:0.45kg The General Electric IS200STAIH2A terminal board boasts an ultra-reliable design, optimized for continuous operation in harsh industrial environments. 

It features advanced signal conditioning techniques, ensuring accurate and stable data transmission under varying conditions. Equipped with a rugged plastic housing, this board offers exceptional protection against dust, moisture, and physical impacts, making it suitable for applications requiring high levels of durability. Supporting Modbus RTU protocol, the IS200STAIH2A facilitates seamless communication with various industrial automation systems, enabling easy integration into existing control networks. With its wide input and output signal ranges, the terminal board is capable of interfacing with a multitude of sensors and actuators, providing versatile solutions for diverse industrial applications. 

 The board  compact size and efficient power consumption make it an ideal choice for space-constrained installations, without compromising on performance. Its robust design and compatibility with leading industrial protocols ensure a reliable and efficient control system performance. The General Electric IS200STAIH2A is an advanced Analog I/O Terminal Board designed for precise control in industrial automation environments, ensuring reliable data acquisition and signal processing.

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).