ABB 3HAB3700-1

ABB 3HAB3700-1

Specification parameters

Electrical Parameters

Working voltage: Supporting 90 - 264V AC wide-range voltage input, it can be adapted to industrial power supply networks in different regions of the world without additional complex voltage conversion equipment. In the common ±10% voltage fluctuation range of marine power system, it can stably output 24V DC working voltage, which can provide stable and reliable power support for the module's internal electronic components and connected external equipment, and ensure that the equipment continues to operate normally under the harsh working conditions of unstable voltage.

Power Consumption: Under normal operation, the power consumption is only [X] W. The low-power design not only helps to reduce the overall energy consumption of the industrial system, but also reduces the heat generation of the equipment, prolongs the service life of the equipment, and reduces the maintenance cost, which is especially suitable for industrial automation scenarios with long-time continuous operation.

Output Frequency: The output frequency can reach up to [X] kHz, and the high-frequency output characteristic makes it perform well in application scenarios that require very high signal response speed, such as high-speed motion control, fast data acquisition and other fields, which can quickly and accurately send control signals to the actuator to achieve the precise action of the equipment.

Performance Parameters

Data processing capability: Equipped with a high-performance 32-bit processor, the data processing speed can reach [X] MIPS (millions of instructions per second), which is able to quickly analyse and execute all kinds of control instructions, and process a large amount of data from sensors, host computers and other devices in a timely manner, to ensure that the system's real-time control needs are met. Whether it is simple logic control or complex algorithms, it can be completed in a short period of time, providing strong support for the efficient operation of industrial automation production.

Memory capacity: [X] KB of user memory space for storing user-written control programmes, system configuration parameters and intermediate data generated during operation. Adequate memory capacity can meet the storage requirements of complex industrial control logic, and at the same time support the rapid call and operation of the programme, reducing the programme stuttering or abnormal operation due to insufficient memory.

Data transmission rate: through the Ethernet interface, the data transmission rate can reach up to 100Mbps, which can quickly transmit a large amount of real-time data, such as in automated production lines, can be uploaded in a timely manner to the massive amount of data collected by sensors, and quickly give control instructions to ensure the efficient operation of the production line; the other serial communication interface also has a higher transmission rate, to meet the communication needs of different devices.

Physical parameters

Dimensions: The external dimension of the product is [L X W X H] mm, the compact design makes it easy to be installed and laid out in the limited space of control cabinets, equipment chassis, etc., which saves valuable installation space and is especially suitable for industrial automation equipment integration projects with high space requirements.

Weight: With an overall weight of approximately [X] kg, the lightweight design not only facilitates handling during installation and maintenance, but also reduces the requirements for the equipment's load-bearing structure, helping to reduce the construction costs of the entire system.

Operating Environment Adaptability

Temperature range: Stable operation in a wide temperature range from - 20°C to + 60°C. Whether it is a cold outdoor working environment or near a high-temperature industrial furnace, it can ensure normal operation without performance degradation or failure due to temperature changes, ensuring the continuity of industrial production under different environmental conditions.

Humidity range: Humidity adaptation ranges from 5% to 95% non-condensing. In humid workshop environments, such as textile factories, food processing plants, etc., it can effectively resist the erosion of humid air, avoiding short-circuiting, corrosion and other failures of electronic components due to humidity problems, and improving the reliability of the product in complex industrial environments.

Protection level: The protection level reaches IP65, which can completely prevent dust from entering, and can withstand low-pressure water jets from all directions, effectively resisting dust, water mist, oil and other harsh environments in the industrial site, to ensure that the module operates stably in complex industrial environments.

Performance Advantages

powerful communication capabilities

Protocol support: Support RS 485, Modbus RTU, DeviceNet, CANopen, Ethernet (Ethernet), Modbus TCP, Profibus DP and other mainstream industrial communication protocols. Among them, RS 485 interface is widely used in industrial field by virtue of its good anti-interference performance and long-distance transmission capability, through which 3HAB3700-1 can easily connect with other devices supporting RS 485 communication, such as smart meters, sensors, actuators, etc., and build up a stable data transmission link, and Modbus RTU protocol is widely used in industrial automation field by virtue of its simplicity and openness. The Modbus RTU protocol, with its easy-to-use and open features, has become an important bridge for the interconnection of devices in the field of industrial automation. 3HAB3700-1 supports this protocol, which can easily achieve communication and data interaction with devices from different manufacturers that follow the Modbus RTU protocol, greatly improving the convenience of system integration. DeviceNet and CANopen protocols are commonly used in industrial automation networks for distributed device control, and 3HAB3700-1 supports this protocol. DeviceNet and CANopen protocols are commonly used for distributed device control in industrial automation networks. 3HAB3700-1's support for these two protocols enables it to be efficiently connected to automation systems based on DeviceNet or CANopen networks to achieve collaborative work and centralised control among devices. Ethernet and Modbus TCP protocols provide the possibility of high-speed, remote data communication and equipment monitoring, facilitating data interaction and remote control with the host computer and remote monitoring centre.