ABB Variable Parameter Control Module 11VP03B H&B Contronic

ABB Variable Parameter Control Module 11VP03B H&B Contronic

Functional Characteristics

Precise parameter control: various parameters, such as voltage, current, frequency, temperature, etc., can be accurately set and adjusted to ensure that the equipment operates in the optimal state, and improve production efficiency and product quality.

Multiple control modes: support multiple control modes, such as manual control, automatic control, remote control, etc. Users can choose the appropriate control mode according to the actual needs, which enhances the flexibility and operability of the system.

Fast response ability: with fast signal processing and response ability, it can adjust the output parameters according to the input signal in time to ensure the stability and reliability of the system, which is suitable for the occasions with high requirements on control accuracy and response speed.

Good compatibility: It is compatible with other series of ABB products and other brands of industrial automation equipment, which is convenient for users to build a complete automation control system.

Application Areas

Industrial automation production line: Widely used in various industrial automation production lines, such as automobile manufacturing, electronic production, food processing, etc., to achieve precise control of various parameters in the production process, to ensure product quality and production efficiency.

Power system: used for monitoring and control of power system, such as substation, power plant, etc., real-time monitoring and adjustment of voltage, current, power and other parameters to ensure the stable operation of the power system.

Intelligent buildings: In intelligent buildings, intelligent control of lighting system, air-conditioning system, ventilation system, etc. can be realised to improve the efficiency of energy utilisation and reduce the operating costs.

Transportation: It is applied to signal control and vehicle scheduling in the field of transportation to improve the efficiency and safety of transportation.

The transfer sequence of OTM_C21D can be summarized in following steps: 

• An anomaly occurs on the Line 1 (LN1) 

• Generator start, immediately start generator in case of black-out, phase-loss, overvoltage or undervoltage (If Generator mode is selected) 

• The Line 2 start the normal functioning,  transfer delay Ts 

• Change-over switch (Switch I) to the position 0 

• Change-over switch (Switch II) to the  position II

And the return sequence can be summarized in  the following steps: 

• The Line 1 will start the normal functioning 

• Change-over switch stays in position II 

• An anomaly occurs on the Line 2 (LN2) 

• Change-over switch stays in position II 

• Change-over switch can be transferred  manually back to position I

The following analyzers are available for selection:  

• Uras26 infrared photometer  for the measurement of infrared-active gas components,  e.g. CO, NO, SO2 

• Limas23 ultraviolet photometer  for the measurement of NO, NO2 and SO2 

• Magnos206 oxygen analyzer  for the measurement of O2 in process gas or in N2 

• Magnos28 oxygen analyzer  for the measurement of O2 in process gas or in N2 

• Magnos27 oxygen analyzer  for the measurement of O2 in flue gas or in N2 

• ZO23 trace oxygen analyzer  for the measurement of O2 in pure gases (N2, CO2, Ar)  

• Caldos27 thermal conductivity analyzer  for the measurement of binary gas mixtures with different  thermal conductivity, e.g. Ar in O2, H2 in Ar, CH4 in N2 

• Fidas24 flame-ionization detector  for the measurement of hydrocarbons  

• Electrochemical oxygen sensor  for the measurement of O2