531X191RTBAFG3 | General Electric Relay Terminal Board 531X Series

531X191RTBAFG3 | General Electric Relay Terminal Board 531X Series

Product Description P/N: 531X191RTBAFG3 DESCRIPTION / SPECIFICATIONS Description The 531X191RTBAFG3 General Electric Relay Terminal Board from the 531X Series facilitates reliable signal routing and relay control in industrial systems. It features multiple relay terminals for efficient connectivity and robust construction for durability. 

Essential for enhancing control and communication in demanding environments. Technical Specifications Condition New / Never Used Surplus Brand General Electric Category PLCs/Machine Control Part Number 531X191RTBAFG3 Subcategory PC Board PLC/Add-On Board Type Relay Terminal Board Series 531X Series Input Voltage Typically 24 VDC (depends on application) Dimensions 250 mm (W) x 150 mm (H) x 50 mm (D) Mounting Panel mountable Operating Temperature 0 to 60掳C (32 to 140掳F) Storage Temperature -40 to 85掳C (-40 to 185掳F) Humidity 5% to 95% (non-condensing) Indicators LED status indicators for relay status Information About 531X191RTBAFG3 The 531X191RTBAFG3 is a relay terminal board developed by General Electric. As a part of the 531X series of replacement boards, it can be used in various GE drives.

 This board has two primary functions: it provides seven relays to control connected external circuits and allows users access to coils and contacts via the terminal board. The 531X191RTBAFG3 offers several useful features. It can operate control functions for external circuits connected to its seven relays and perform tabulations for relay contacts and RTB points. The coils and contacts on this board are rated for G3 revisions of the series. The coils operate at 115 VAC with a frequency of 50/60Hz, with inrush current capped at 25 mA and holding currents rated at 14 mA. The contacts have a rating of 2.4 A each, with voltage ratings of 125 VAC or 28 VDC. To ensure the board's integrity, follow all manufacturer-provided installation parameters. Only trained personnel should handle and install this card to avoid damage from improper handling or wiring. 

 Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

l The technical specifications and typical applications of the product system must be strictly observed.

l PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

Hazardous area conditions must be instructed and explained to these personnel.

l Unauthorised modifications: No modifications or structural changes may be made to the product system.

l Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

l Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.