GE Fanuc A90L-0001-0537/R Fan Motor, High Efficiency and Durability for Industrial Applications

GE Fanuc A90L-0001-0537/R Fan Motor, High Efficiency and Durability for Industrial Applications

Motor Type:AC Induction Speed:1440 RPM Power Rating:0.75 HP Voltage:115/230V, 50/60Hz Torque:11.6 lb-in Size:Compact Frame Size Efficiency:IE2 Compliance Temperature Range:-40"C to 70"C The GE Fanuc A90L-0001-0537/R industrial fan motor is engineered for reliability and efficiency in demanding industrial environments. This AC induction motor boasts a robust frame design suitable for applications requiring high performance and consistent airflow. Featuring a 0.75 HP capacity at 3600 RPM, it is capable of handling a wide range of operational demands. Its 1 HP frame size and compatibility with both 115V and 230V power sources offer flexibility in installation and use.

 Equipped with IP54 protection class, the motor ensures durability against dust and light water splashes, enhancing its longevity in harsh conditions. The F insulation class guarantees excellent heat resistance, ensuring stable operation over extended periods. With clockwise shaft rotation from the drive end, this motor is conveniently compatible with various systems and equipment configurations. The open frame design facilitates easy maintenance and cooling, further contributing to its operational efficiency and safety. Ideal for applications in manufacturing, HVAC, and other industries where reliable air movement is critical, the GE Fanuc A90L-0001-0537/R industrial fan motor is a premium choice for enhancing productivity and operational effectiveness. The GE FANUC A90L-0001-0537/R Industrial Fan Motor is designed for high-efficiency operation in demanding industrial environments, ensuring reliable ventilation solutions. 

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module