ABB DSDI146 3BSE007949R1 DSAI 146 Analog Input Unit
ABB DSDI146 3BSE007949R1 DSAI 146 Analog Input Unit
DESCRIPTION
The ABB DSDI146 3BSE007949R1 DSAI 146 Analog Input Unit is designed for precise temperature measurement using Pt100 sensors. With 31 input channels, it allows for comprehensive temperature monitoring in industrial applications. The unit offers high accuracy and resolution, ensuring reliable and accurate temperature readings. It is commonly used in process control systems and various temperature-sensitive industrial processes.
PARAMETERS
Temperature Range: -200°C to +850°C
Accuracy: ±0.1°C
Resolution: 0.01°C
Technical specifications
Operating voltage: 220V
Output frequency: 50Hz
Channel update rate: 1 second typical
Energy Power Consumption: 4.6 watts maximum
Operating temperature: -30°C to +65°C
Storage temperature: -40°C to +85°C
Humidity: 95%, non-condensing
Product Features
4-channel opto-isolated input interface: provides high security and anti-interference capability
New generation 32-bit DSP technology: may support intelligent motion control function, with high cost-effectiveness, good smoothness, low noise, low vibration and so on.
EtherCAT bus communication function: support COE protocol, as a standard EtherCAT slave driver unit, support the market mainstream master controller
Multiple operating modes: Cyclic Sync Position, Profile Position, Profile Velocity, Homing, etc.
Over-voltage, under-voltage, over-current and other protection functions: to ensure the safe operation of the equipment.
Instructions and warnings related to the operation of the product:
The following specifications must be strictly observed:
The technical specifications and typical applications of the product system must be strictly observed.
PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the
These personnel must be instructed and briefed on the conditions in the hazardous area.
Unauthorised modifications: No modifications or structural changes may be made to the product system.
Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.
Working environment: The user must fulfil the specified environmental conditions:
Safety regulations
The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:
1 Disconnect completely.
2 Secure to prevent reconnection.
3 Confirm that the installation has been completed.
4 Perform grounding and short-circuiting.
More Related Models:
ABB CM572 PROFIBUS communication module Input/output module
ABB PM582-ETH Processor module Input/output module
ABB System 800xA Extended Automation
ABB Web TensionSystems with Tension Electronics PFEA 113
- User name Member Level Quantity Specification Purchase Date
- Satisfaction ：
-
-
ABB LT8978bV1 HIEE320639R0001 Analog I/O Unit -
ABB ARC093AV1 Industrial Control High Frequency Module -
ABB UAC318AE HIEE300744R0001 Industrial Digital I/O Module -
ABB UFC092BE01 HIEE300910R0001 Binary Input Module -
ABB UNS2980c-ZV4 digital I/O module -
ABB UNS0874A Digital I/O Card -
ABB 5SHY3545L0005 Asymmetric Integrated Gate Commutated Thyristor -
ABB 5SHY3545L0003- Advanced Voltage Protection Module -
ABB 5SHY35L4510 Asymmetric Integrated Gate Commutated Thyristor -
ABB 57160001-ACX DSDP 140B Counter Board -
ABB 216VC62A Numerical Generator Protection -
ABB 3ASC25H203-12 DAPC 100-12; Control board, with CMT memory stick -
ABB DSQC545A 3HAB8101-19/07E servo drive power module -
ABB 3BSE018157R PM861AK01 Processor Unit -
ABB PM802F 3BDH000002R1 Controller -
ABB REP57160001-KX DSDO 131 Digital Output Unit -
ALSTOM AL132, AL132A, STO0982E01 industrial module card -
ALSTOM AB121 controller module -
ALSTOM AS111-1 control board -
Alstom AH116-2 controller board control module
-
ALSTOM V4555724-0100- High Performance Control Module -
ALSTOM KCEU142 KCEU14201F51PEB control modul -
ALSTOM MMLG01 module -
ALSTOM V4561983-0100 High Performance Relay Module -
Alstom MV7306P22 Medium Voltage Drive -
Alstom MV7306P21 frequency converte -
ABB CS31 ICSF08D1 FPR3323101R1012 -
ABB 3BSE020510R1 DO801 Digital Output 24V 16 ch -
ABB 3BDH000022R1 EI 813F Ethernet Module 10BaseT -
ABB IEPAS01 Power Supply Module -
ABB AI845 Ability™ System 800xA® hardware selector -
ABB 3HAC4776-1/1 Industrial Control Module -
ABB DSTF620 HESN119033P1 Industrial Process Connector -
ABB DSTF610 Terminal, Industrial Automation Components -
ABB TET106 11355-0-6050000 Industrial Control Module -
ABB IMASI23 module -
ABB CP-E 24/1.25 Power supply -
ABB YYT107A YT212002AD PLC module -
ABB YPK112A - Advanced Industrial Control Module -
ABB YB560100-EA S3 Industrial Control Module -
ABB XO16N1-B20 XO16N1-C3.0 digital logic module -
ABB XM06B5- Advanced Industrial Control Module -
ABB XI16E1 I/O Expansion Module Digital -
ABB V4550220-010 controller module -
ABB TU810V1 System 800xA hardware selector
-
ABB TU841 Communications - S800 I/O Communication interfaces
-
ABB TU515, TU516(-H), TU541, TU542 Terminal unit
-
ABB TK516 Thermal Overload Relay and Circuit Board Circuit Breaker -
ABB 630 series Engineering Manual -
ABB TC625 3BSE002224R1 – AF100 Coaxial Modem, High-Performance Fieldbus Communication Module
-
ABB TB511, TB521, TB523, TB541 Terminal base -
ABB TA524:AC500,Dummy Coupler Module -
ABB TA25DU – TA450DU Thermal Overload Relays Electronic Overload Relays -
ABB 3BSE000863R1 SR511 Regulator 24V/5V -
ABB SPCJ4D34-AA electric protection relay -
ABB SPA-ZC22 Bus connection module -
ABB SPAD 346 C Stabilized Differential Relay -
ABB SNAT617CHC Advanced Control Module for Industrial Automation -
ABB SK829007 - B Controller Module
-
ABB SK-11 Signal contact 1NO+1NC -
ABB SE96920414 YPK112A Industrial Communication Module -
ABB Advant OCS SC610 Sub-Carrier Module (3BSE001552R1) -
ABB SC513 Analog Input Module -
ABB 3BSE002098R1 SB512 Power Supply. Input 110/230V AC -
ABB SAFT110 power module -
ABB SAFT103 Industrial Control Module -
ABB SA801F 3BDH000011-REF Power Supply 115/230 VAC -
ABB RVC6-5A Power Factor Controller
-
ABB REF615 Feeder Protection and Control -
ABB REF 542plus relay protection device -
ABB RB520- Dummy Module for Submodule Slot Product Introduction -
ABB R1.SW2/3 – High-Performance Control Module for Industrial Automation -
ABB R1.CAIR – High Performance Control System Component
-
ABB PU517 Controller Automation System
-
ABB STUP-PU515A-PU51X RTA Board with Dual ch. MB300 -
ABB PS130/6-75-P Industrial Control Module
-
ABB 3BSE008062R1 PM633 Processor Module
-
ABB PM632 Processor Module -
ABB PML630 Load Shedding Controller -
ABB 64669303 NAIO-03F OPTION/SP KIT ANALOG IO-UNITKIT; I/O KIT
-
ABB RS232 MSR04XI Serial Communications Module -
ABB Arc Welding System M2004 IRC5
-
ABB L110-24-1 RUBBER ELEMENT FOR JAW COUPLING -
ABB INNP012 Network Processor Module -
ABB INNIS01 Network Processing Module -
ABB MSET01 MODULE， SEQ OF EVENTS -
ABB IMSED01 main processor unit -
ABB IMMPI01 Multi functional Processor Interface
-
ABB IMMFP12 Multi-Function Processor Module -
ABB IMFEC12 Analog Input Module
-
ABB IMDSO14 Digital Output Module -
ABB IMDSI14 Digital Input Modules
-
ABB HK-11 auxiliary contact
-
ABB 3BDH000032R1 FI830F Fieldbus Module PROFIBUS-DP
-
ABB EI803F Ethernet Communication Module -
ABB EHDB280 drive contactor -
ABB EHDB130 drive contactor -
ABB DSU10 Controller Module -
ABB DSTD108 Connection Unit
-
ABB DSQC627 3HAC020466-001 Digital Input Module -
ABB DSQC626 – Modular Power Supply for Industrial Automation -
ABB DSQC609 Advanced Power Module
-
ABB DSQC608 3HAC12934-1 – High-Performance I/O Module for Robotic Applications -
ABB DSQC602 Analog Output Module -
ABB DSQC354 Power Supply -
ABB DSQC352 High Performance Input/Output Module
-
How to properly install and maintain ABB's REX 521 protective relay? -
ABB REX 521 Feeder Protection Relay
-
ABB DSQC346 servo drive module
-
ABB DSQC346G Servo Drive
-
ABB DSQC327A High-performance Module for Industrial Automation -
ABB DSQC322 controller relay module
-
ABB DSQC313 High Accuracy Measuring Boards -
ABB DS201 - DS202C New residual current circuit-breakers with overcurrent protection (RCBOs)
-
ABB DSPC406 Digital Signal Processor Module -
ABB 3BHT300007R1 DO630 Digital Output 16ch 250VAC -
ABB 37911-4-0338125 Industrial Control Modules -
ABB 07KT97F1 Advant Controller 31 Intelligent Decentralized Automation System
-
How can I tell if the 88QT03 Bus Coupling Module is working properly? -
ABB 88QT03--E/R2011 Bus Coupling Module -
ABB 07KT97B Advant Controller 31 Intelligent Decentralized Automation System -
ABB 3BSE013064R1 PU516 Engineering Board -PCI -
ABB DSPC172H High Performance Processor Unit -
ABB EXC57310001-ML DSPC 172 Processor Board -
ABB DSPC170 Industrial Processor Module -
ABB DSIH72VP ENOK Hydraulic Servo Module
-
ABB 5716075-P DSDX 452 Remote In / Out Basic Unit -
ABB DSDX404 Digital Signal Expansion Module
email：1583694102@qq.com
wang@kongjiangauto.com