ABB P3EB HENF315223R1 Excitation Redundancy Module

ABB P3EB HENF315223R1 Excitation Redundancy Module

INTRODUCTION

P3EB HENF315223R1 is based on the same drive technology as the previous Motion Chip, this drive reduces the time needed to assemble the machine by changing the screw-type contacts into simple pins. The system integrator can now easily design a clean board to hold all the components and remove all the cables. PIM2043 controls DC, brushless, linear and stepper motors up to 75W (24V, 3A) and embeds motion control, drive and PLC functionality in an open-frame unit (dimensions 59x42x20mm). The drives are programmable in the EaseMotion Studio with the Technical Soft Motion Language (TML) and graphical tools. It is most valuable in systems with distributed intelligence, where motion application tasks are distributed between the master drive and the drives. Its embedded motion controllers provide the same high-level motion language for all motors, making their technical differences transparent to the user.

SPECIFICATIONS

Input voltage：110V-380V

Electric current：1A-30A

Power： 5W-130W

Warranty period：1 year

Stock Quantity：30

Place of origin：United States, France, Japan, Viet Nam, Australia, Russia, Germany, Italy, Arabia 

Product Features

Brand and origin: the product is manufactured by ABB, originating from Sweden, reflecting ABB's leading position and high quality standards in the field of industrial automation.

Application areas: It may be widely used in industrial automation systems that require high reliability and safety, such as electric power, petroleum, chemical, metallurgy and other industries.

Redundancy design: Through redundancy design, the module can automatically switch to the backup system when the main system fails to ensure continuous and stable operation of the system.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

The technical specifications and typical applications of the product system must be strictly observed.

PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

Unauthorised modifications: No modifications or structural changes may be made to the product system.

Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.