ABB TB820-2V2 3BSE013209R1 Hardware selector

ABB TB820-2V2 3BSE013209R1 Hardware selector

Product Overview

Brand and Model: ABB, TB820-2V2 3BSE013209R1

Category: Digital Input Module

Application: digital signal input and processing in industrial automation control systems

Technical features and functions

Modular design: modular structure design, easy to configure and function expansion according to user needs.

Integrated piping system: integrated and assembled piping system may be adopted to reduce piping connection points, lower the air leakage rate and improve the ultimate vacuum degree (Note: this feature may be for specific application scenarios or product series, which need to be confirmed specifically).

High-precision sensors: may be equipped with high-precision silicon thin-film pressure sensors to improve measurement accuracy.

Programmable controller: Programmable controller (PLC) solenoid valve control system is adopted for strong anti-interference ability and high stability.

Separation structure: test system piping and sample processing piping are separated to prevent impurities generated during sample processing from contaminating the test piping.

Application Fields

Industrial automation: as a key component in the industrial automation control system, it realises the input and processing of digital signals.

Process control: In process control systems, it is used to monitor and control various process parameters.

Robot control: may be applied in robot control system to achieve precise signal transmission and control.

Cautions

Compatibility: Before purchase and use, please ensure that the module is compatible with your industrial automation control system.

Installation and Maintenance: Please follow the installation guide and maintenance manual provided by ABB to ensure the normal operation and prolong the service life of the product.

Quality Assurance: Choose regular channels to purchase ABB products to ensure product quality and after-sales service.

Product Parameters and Specifications

Processor: 32-bit RISC processor

Clock frequency: 100 MHz

Memory: 128MB

Flash memory: 256MB

Communication interface: RS-232/485, Ethernet, etc.

Input/output interface: analogue input/output, digital input/output

Operating temperature: -25°C to +60°C

Storage temperature: -40°C to +85°C

Relative humidity: 5% to 95% (non-condensing)

Protection rating: IP65

Product specification: 300mm x 200mm x 100mm

Installation and Maintenance

Environmental conditions:

Ensure that the module is installed within the recommended temperature and humidity ranges and avoid direct exposure to water, oil, dust or electromagnetic interference.

Power Requirements:

Use a stable power supply to avoid damage to the module from voltage fluctuations.

Signal Cable Connection:

Connect the signal lines correctly to ensure the accuracy and stability of signal transmission.

Software Configuration:

Correctly configure the software parameters of the module according to the system requirements to ensure compatibility with other parts of the control system.

Maintenance and Inspection:

Perform regular maintenance and inspection of the module, including cleaning and checking the contact status of the connectors.

Precautions

Operator Training:

Operators should receive proper operation and maintenance training to avoid malfunctions or safety accidents caused by incorrect operation.

Technical Documentation and Safety Guidelines:

The technical documentation and safety guidelines provided by the manufacturer should be read and understood in detail before installation and use.

Compliance with safety regulations:

Observe all relevant safety procedures to ensure personal safety, especially when handling high-pressure or high-speed rotating equipment.