BENTLY 330103-00-04-10-02-00 Proximity Transducer System

BENTLY 330103-00-04-10-02-00 Proximity Transducer System

Product Overview

Brand: Bentley (Bently)

Model: 330103-00-04-10-02-00

Use: The system is mainly used to measure the vibration, displacement and other parameters of mechanical equipment, is an important tool for industrial automation and mechanical equipment condition monitoring.

System Components

Bentley 330103-00-04-10-02-00 proximity sensor system usually consists of the following components:

Probe: responsible for sensing changes in the position or displacement of the object under test and converting it to an electrical signal output.

Extension cable: used to connect the probe to the preamplifier and transmit the electrical signal generated by the probe.

Preamplifier: amplifies and filters the electrical signal output from the probe so that it can be received and processed by the subsequent equipment.

Technical specifications and performance

Diameter: 8mm (probe part)

Thread specification: M10×1 (for installing and fixing the probe)

Output signal: voltage signal proportional to the distance between the probe end and the surface of the measured conductor.

Measuring range: measurement of radial vibration, axial displacement, eccentricity and other parameters.

Sensitivity: high sensitivity design, able to accurately capture small displacement or vibration changes.

Accuracy: High measurement accuracy, able to meet the precise requirements of industrial automation and mechanical equipment condition monitoring.

Application Features

High-precision measurement: advanced sensing technology and signal processing algorithms are used to ensure the accuracy and stability of the measurement results.

High reliability: the system components undergo strict quality control and testing, with high reliability and durability.

Easy to install and maintain: The system components are reasonably designed, easy and quick to install, and easy to carry out routine maintenance and calibration.

Wide applicability: applicable to various mechanical equipment and industrial automation fields, such as turbines, generators, compressors and so on.

Precautions for use

When using the system, ensure stable supply of power and signal to avoid interference and error.

Maintain and calibrate the system regularly to ensure its long-term stable operation.

During installation and commissioning, product instructions and safety codes should be followed to ensure proper installation and wiring.

Extended Temperature Range Applications

An extended temperature range (ETR) probe and ETR extension cable are available for applications in which either the probe lead or extension cable may exceed the standard 177˚C (350˚F) temperature specification. The ETR probe has an extended temperature rating for up to 218˚C (425˚F). The ETR extension cable rating is up to 260˚C (500˚F). Both the ETR probe and cable are compatible with standard temperature probes and cables, for example, you can utilize an ETR probe with the 330130 extension cable. The ETR system uses the standard 3300 XL Proximitor Sensor. Note that when you use any ETR component as part of your system, the ETR component limits the system accuracy to the accuracy of the ETR system.

Description Notes:

 1. One-meter systems do not use an extension cable. 

 2. Proximitor sensors are supplied by default from the factory calibrated to AISI 4140 steel. Calibration to other target materials is available upon request. 

 3. Consult Bently Nevada Applications Note, Considerations when using Eddy Current Proximity Probes for Overspeed Protection Applications, when considering this transducer system for tachometer or overspeed measurements.

 4. 3300 XL 8 mm components are both electrically and physically interchangeable with non-XL 3300 5 mm and 8 mm components. Although the packaging of the 3300 XL Proximitor Sensor differs from its predecessor, its design fits in the same 4-hole mounting pattern when used with the 4-hole mounting base, and will fit within the same mounting space specifications (when minimum permissible cable bend radius is observed). 

 5. Mixing XL and non-XL 3300-series 5 mm and 8 mm system components limits system performance to the specifications for the non XL 3300 5 mm and 8 mm Transducer System. 

 6. The 3300-series 5 mm probe (refer to Document 141605) uses smaller physical packaging, but does not reduce the side view clearances or tip-to-tip spacing requirements as compared to an 8mm probe. It is used when physical (not electrical) constraints preclude the use of an 8 mm probe. When your application requires narrow side view probes, use the 3300 NSv Proximity Transducer System (refer to Document 147385).