Bently Nevada 190501 Velomitor* CT Velocity Transducer

Bently Nevada 190501 Velomitor* CT Velocity Transducer

Description 

The Velomitor* CT Velocity Transducer is a low-frequency version of our standard Velomitor Piezo-velocity Sensor. Its design specifically measures casing vibration velocity on cooling tower and air-cooled heat-exchanger fan assemblies that operate at or above 90 rpm (100 to 300 rpm typical). The Velomitor CT Transducer can measure vibration amplitudes at these frequencies as well as the vibration frequencies generated by the fan motor and speed reducer.

Technical characteristics

Measurement Range: Specifically designed to measure the vibration velocity of equipment with speeds equal to or greater than 90 rpm.

Mounting Options: A variety of mounting hardware options are available, such as plate studs 3/8 inch 24 to M8x1, and quick-release assemblies, making it easy for users to install according to their actual needs.

Connection interface: MIL-C-5015 connection interface is adopted to ensure the stability and reliability of the connection.

Operating environment: Operating temperature range of -40 °C to +85 °C (-40 °F to +185 °F), storage temperature range of -40 °C to +100 °C (-40 °F to +212 °F), suitable for a variety of industrial environments.

Physical Characteristics: The mounting surface is 33 mm (1.3 in. diameter) in diameter, 8.2 cm (3.2 in.) in height, and weighs 0.297 kg, providing a smaller size and lighter weight for ease of installation and portability.

SPECIFICATIONS

Input voltage：110V-380V

Electric current：1A-30A

Power： 5W-130W

Warranty period：1 year

Stock Quantity：30

Place of origin：United States, France, Japan, Viet Nam, Australia, Russia, Germany, Italy, Arabia 

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.