ABB Contronic Module CAA10 H&B Contronic

ABB Contronic Module CAA10 H&B Contronic

Basic information

Model and number: Model CAA10 belongs to the ABB H&B Contronic series. The exact part number may vary depending on the production batch, etc.

Dimensions and weight: There is no specific information on dimensions and weight. You can refer to other modules in the same series, the approximate dimensions may be around 10 - 30cm long, 5 - 10cm wide and 10 - 30cm high, and the weight may be between 0.5 - 2kg.

Place of origin and shipment: ABB products are usually produced in European countries (e.g. Germany, Switzerland), while the shipment place may vary depending on the supplier and sales channel.

Functional features

Signal Processing and Control Functions: As a Contronic module, the CAA10 is likely to have signal processing capabilities, both for analogue and digital signals. It may be able to receive, convert and transmit a variety of signals, such as those from sensors, and convert them into a format that can be used effectively by the system. It may also have certain control functions for controlling the operating status of industrial equipment.

System integration: As it belongs to the ABB H&B Contronic series, it is able to work with other modules of the same series (e.g. input modules, output modules, control modules, etc.). Data can be exchanged with other modules through standard interfaces and communication protocols (e.g. industrial Ethernet protocols, fieldbus protocols, etc.), thus constituting a complete industrial automation control system.

Fields of application

Widely used in the field of industrial automation: in the chemical industry, it can be used for the control and monitoring of temperature, pressure, liquid level and other parameters in the chemical reaction process. In the pharmaceutical industry, it can help control the operation parameters of pharmaceutical equipment to ensure the quality of drug production. In the discrete manufacturing industry, such as automobile manufacturing and electronic manufacturing, it is used for the control of automated production line equipment, such as the movement control of robots, data acquisition of automated testing equipment, etc., to improve production efficiency and product quality.

Supported ABB I/O Systems and Families

• S800 I/O, a distributed modular I/O system for communication via ModuleBus  and PROFIBUS DP. 

• S900 I/O, a remote I/O system (for hazardous areas) that can be connected to  PLCs via PROFIBUS DP. 

• S200 I/O and S200L I/O, two compatible, modular I/O systems. S200 I/O  modules can be connected via CI856 or PROFIBUS DP to PLCs. • S100 I/O, a rack-based I/O system that can be connected to PLC using the  CI856 interface module. 

• Satt I/O, makes it possible to use Satt Rack I/O (an older Satt I/O system)  connected to PLC using the CI865 communication interface.

Main features

· 24 digital inputs with LED displays 

· 16 digital transistor outputs with LED displays 

· 8 digital inputs/outputs with LED displays 

· 8 individually configurable analog inputs 0...10 V, 0...5 V, ±10 V, ±5 V, 0...20 mA, 4...20 mA, differential inputs, Pt100 (2-wire or 3-wire), the analog inputs are also individually configurable as digital inputs 

· 4 individually configurable analog outputs ±10 V, 0...20 mA, 4...20 mA 

· 2 counters for counting frequencies up to 50 kHz, configurable in 7 different operating modes · 1 CS31 system bus interface for system expansion 

· 1 interface for connecting communication modules (e.g. 07 KP 90) 

· 2 serial interfaces COM1, COM2 

– as MODBUS interfaces and 

– for programming and test functions 

· Real-time clock 

· LEDs for displaying operating conditions and error messages 

· Detachable screw-type terminal blocks 

· Fastening by screws or by snapping the device onto a DIN rail 

· The lithium battery 07 LE 90 can be put into the battery compartment in order to 

– store and backup the user program in the RAM 

– store and backup data which is additionally contained in the RAM, e.g. the status of flags 

– backup the time and date (real-time clock) 

· RUN/STOP switch for starting and aborting the program execution 

· Extensive diagnosis functions 

– self-diagnosis of the basic unit 

– diagnosis of the CS31 system bus and the connected modules