ABB Binary Output Module CBO 10 H&B Contronic

ABB Binary Output Module CBO 10 H&B Contronic

The ABB Binary Output Module CBO 10 H&B Contronic has the following features:

Basic information: model number CBO 10, product number p 72133-4-0788733, origin is Germany, shipping place is Webster, New York, USA, dimensions are about 20.3cm x 5.1cm x 30.5cm, weight is about 0.7kg.

Functional characteristics: As a binary output module, it can convert digital signals into binary output signals, which can be used to control the switching state of external devices such as relays and contactors, and realise the control of all kinds of devices in industrial processes. Its internal isolation circuit can prevent external interference and faults affecting the internal circuit, improve system reliability and stability, and ensure the accuracy and stability of the signal output. Moreover, the module belongs to ABB H&B Contronic and ABB H&B Melody/Contronic S series, which can be easily combined with other modules of the same series, such as input modules, control modules, etc., to build a complete industrial automation control system.

Applications: Widely used in chemical industry, electric power, metallurgy, water treatment and many other industrial automation fields, commonly used in motor start/stop control, valve switch control, signal light control, etc., which can effectively improve the production efficiency, reduce the labour intensity, and enhance the reliability and stability of the entire production system.

OTHER INFORMATION

• The operator panel is designed for stationary installation on a planar surface, where the following conditions are fulfilled: 

– no high explosive risks 

– no strong magnetic fields 

– no direct sunlight 

– no large, sudden temperature changes 

• Install the operator panel according to the accompanying installation instructions. 

• Ground the operator panel according to the accompanying installation instructions. 

• Only qualified personnel may install the operator panel. 

• Separate the high voltage, signal and supply cables. 

• Make sure that the voltage and polarity of the power source is correct before connecting the operator panel to the power outlet. 

• Peripheral equipment must be appropriate for the application and location. 

• In a Zone 2 environment, this equipment shall be installed in an enclosure that provides a degree of protection not less than IP 54 or greater than IP 65 in accordance with IEC/EN 600079-0. The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into. 

• In a Zone 22 environment, this equipment shall be installed in an enclosure that provides a degree of protection not less than IP 64 or greater than IP 65 in accordance with IEC/EN 600079-0. The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into.

Service and Maintenance

• Only qualified personnel should carry out repairs. 

• The agreed warranty applies. 

• Before carrying out any cleaning or maintenance operations, disconnect the equipment from the electrical supply. 

• Clean the display and surrounding front cover with a soft cloth and mild detergent. 

• Replacing the battery incorrectly may result in explosion. Only use batteries recommended by the supplier. During the warranty period, the battery needs to be replaced by an authorized ABB service center