ABB Coupler Module CCC 30-2 H&B Contronic

ABB Coupler Module CCC 30-2 H&B Contronic

The ABB Coupler Module CCC 30-2 H&B Contronic is a coupler module manufactured by ABB in conjunction with Hartmann & Braun with the following features:

Basic information: model number CCC 30-2, product number 9280151, origin Switzerland, shipping to Webster, NY, USA. Its dimensions are approx. 7.6cm x 30.5cm x 17.8cm and its weight is approx. 1.9kg.

Functional characteristics: It is mainly used to achieve the functions of signal coupling, conversion, isolation and amplification to ensure the accurate transmission of signals between different devices or systems, so as to realise effective communication and cooperative work between various parts of the industrial automation system. This module belongs to ABB H&B Contronic and ABB H&B Melody/Contronic S series, can be used with other modules of the same series to build a complete industrial automation control system.

Applications: Widely used in industrial automation, such as manufacturing, energy management, water treatment and other industries, commonly used to connect PLC, sensors, actuators and other equipment, in order to achieve interoperability and data sharing between the equipment, and thus improve production efficiency, reduce costs and optimise production processes.

Supported ABB I/O Systems and Families

• S800 I/O, a distributed modular I/O system for communication via ModuleBus  and PROFIBUS DP. 

• S900 I/O, a remote I/O system (for hazardous areas) that can be connected to  PLCs via PROFIBUS DP. 

• S200 I/O and S200L I/O, two compatible, modular I/O systems. S200 I/O  modules can be connected via CI856 or PROFIBUS DP to PLCs. • S100 I/O, a rack-based I/O system that can be connected to PLC using the  CI856 interface module. 

• Satt I/O, makes it possible to use Satt Rack I/O (an older Satt I/O system)  connected to PLC using the CI865 communication interface.

Main features

· 24 digital inputs with LED displays 

· 16 digital transistor outputs with LED displays 

· 8 digital inputs/outputs with LED displays 

· 8 individually configurable analog inputs 0...10 V, 0...5 V, ±10 V, ±5 V, 0...20 mA, 4...20 mA, differential inputs, Pt100 (2-wire or 3-wire), the analog inputs are also individually configurable as digital inputs 

· 4 individually configurable analog outputs ±10 V, 0...20 mA, 4...20 mA 

· 2 counters for counting frequencies up to 50 kHz, configurable in 7 different operating modes · 1 CS31 system bus interface for system expansion 

· 1 interface for connecting communication modules (e.g. 07 KP 90) 

· 2 serial interfaces COM1, COM2 

– as MODBUS interfaces and 

– for programming and test functions 

· Real-time clock 

· LEDs for displaying operating conditions and error messages 

· Detachable screw-type terminal blocks 

· Fastening by screws or by snapping the device onto a DIN rail 

· The lithium battery 07 LE 90 can be put into the battery compartment in order to 

– store and backup the user program in the RAM 

– store and backup data which is additionally contained in the RAM, e.g. the status of flags 

– backup the time and date (real-time clock) 

· RUN/STOP switch for starting and aborting the program execution 

· Extensive diagnosis functions 

– self-diagnosis of the basic unit 

– diagnosis of the CS31 system bus and the connected modules