DS200PTCTG2B | General Electric Signal Conditioner Board

DS200PTCTG2B | General Electric Signal Conditioner Board

Product Description P/N: DS200DCFBG1BKC Description / Specifications Description The GE DS200DCFBG1BKC Mark V Power Supply Board is essential for the Mark V turbine control system, delivering stable power regulation and distribution. It ensures reliable operation and power integrity for control components, maintaining efficient and consistent turbine performance in demanding environments. Technical Specifications Brand General Electric Category Drives Part Number DS200DCFBG1BKC Subcategory Drive Board Series Mark V Functional Description Power Supply Board Functional Acronym DCFB PCB Coating Normal Coating Functional Revision 1 B Functional Revision 2 K Artwork Revision C Information 

About DS200DCFBG1BKC The General Electric DS200DCFBG1BKC Mark V Power Supply Board is a crucial component within the Mark V control system, designed to provide reliable and stable power regulation for turbine control applications. This drive board, categorized under the Drives category, ensures the efficient distribution and management of power within the control system, contributing to the overall stability and performance of turbine operations. Part of the Mark V series, the DS200DCFBG1BKC serves as a Power Supply Board (PSB), with the functional acronym DCFB indicating its role in power supply functions. 

The board is equipped with a normal PCB coating, offering protection against environmental factors and ensuring long-term reliability in industrial settings. The board's functional revisions include Revision 1B and 2K, which denote updates and improvements made to enhance its performance and compatibility. The artwork revision, labeled as C, indicates the latest design and layout adjustments, ensuring alignment with current manufacturing standards and specifications. 

 This power supply board is integral to maintaining consistent power levels and protecting control system components from power-related issues. It supports the Mark V control system's functionality by ensuring stable power distribution, which is essential for the efficient and reliable operation of turbine systems. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. 

 IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

OTHER INFORMATION

• Up to 1.26 GHz Pentium® III processor with 256 KB advanced  transfer cache  

• Up to 512 MB PC-133 SDRAM using a single SODIMM  

• Internal AGP SVGA controller with 4 MB display cache  

• 133 MHz system bus via Intel® 815E chipset  

• Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces  

• Optional PCI dual channel Ultra160 SCSI  

• Up to three (two with rear I/O support) PMC expansion sites  (IEEE-P1386 common mezzanine card standard, 5 V)  

• Up to 1 GB bootable flash on secondary IDE (optional)  

• Two 16-bit and two 32-bit programmable timers  

• 32 KB of nonvolatile SRAM  

• Software-selectable watchdog timer with reset  

• Remote Ethernet booting  

• Optional IDE hard disk drive  

• VME64 modes supported:  A32/A24/D32/D16/D08(EO)/MBLT64/BLT32  

• VMEbus interrupt handler, interrupter and system controller  

• Includes real time endian conversion hardware for littleendian and big-endian data interfacing (patent no. 6,032,212)  

• Enhanced bus error handling  

• Passive heat sink