GE DS200UDSAG1A Gas Turbine Control System Excitation Board

GE DS200UDSAG1A Gas Turbine Control System Excitation Board

Part Number DS200UDSAG1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS200UDSAG1A is a Display/Keyboard Interface Board manufactured and designed by General Electric as part of the EX2000. The interface for the display features a dot matrix display with two rows of 40 characters each and one row of 12 characters. There are a total of 48 keys on the two keypads. 

One keypad has 32 (2 sets of 16) programmable keys that can be backed by LED status indicators. The secondary keypad contains 16 keys that can be used for diagnostics, local mode operations, and numeric entry. DS200UDSAG1A Hardware Components The major hardware components for the USDA are: A switching power supply with a minimum of 3 A at 5 V and a -24 V to 5 V range. A central processor Circuitry for RS-232C interface Circuitry for the keypad scanning interface Circuitry for the key status LED interface Circuits for display driver Important pulse-width modulated (PWM) dimmer circuits for LED and displays DS200UDSAG1A Operation The board receives and sends signals from other boards as well as a 40-pin connector that is used to populate the board. 

Other boards and gadgets in the drive typically send signals to the board. The signals are processed by the microprocessor on the board, which employs the other components on the board to do so. The 4-character screens and the 32 LEDs that populate the board offer information to the operator about the state of the board. When the signals have been processed, the new information is transferred to additional components and boards. It's crucial that all of the signals connect to the 40-pin connector. The ribbon cable, on the other hand, is easily damaged due to the lack of support provided to the plastic connector on the ribbon cable's end. That is, removing the thin copper wires from the connector is simple. Never pull the ribbon cable out of the connector on the board to keep it intact. Instead, firmly hold the ribbon cable's plastic connector and slowly pull it out of the connector.

OTHER INFORMATION

• Available with either the 1.1 GHz, 1.6 GHz or 1.8 GHz  Pentium® M processor  

• 1.4 GHz Pentium M processor coming soon  

• Up to 2 Mbyte of advanced L2 cache  

• Up to 1.5 Gbyte DDR SDRAM  

• Up to 2 Gbyte bootable CompactFlash on secondary IDE (see  ordering options)  

• Internal SVGA and DVI controller  

• Serial ATA support through P2 rear I/O  

• 400 MHz system bus via Intel® 855GME chipset  

• Ethernet controller supporting 10BaseT and 100BaseTX  through the front panel  

• Gigabit Ethernet controller supporting 10BaseT, 100BaseTX  and 1000BaseT interface with optional VITA 31.1 support  

• Four asynchronous 16550 compatible serial ports  

• Four Universal Serial Bus (USB) Rev. 2.0 connections, two on  the front panel and two rear I/O  

• PMC expansion site (PCI-X, 66 MHz)  

• 32 Kbyte of nonvolatile SRAM  

• Operating system support for Windows® XP, Windows 2000,  VxWorks®, QNX® , LynxOS® and Linux

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider