GE DS3800HCMA Dual Communications Control Board

GE DS3800HCMA Dual Communications Control Board

Part Number DS3800HCMA Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800HCMA is a dual communications control board developed by GE. It is a part of Mark IV control system Features The Board contains a modular connector for attachment to a drive and retention levers to hold the board in the drive. It has 20 jumpers, as well as 1 amber and 2 red indicator Lights. The board also has two 34-pin connectors and a number of capacitors. 

The indicator LEDs on the GE Dual Communications Control Board give the operator a fast and easy method of monitoring the processing health of the board. If the red LED is lighted, it signifies that an error condition has occurred. If one or both of the amber LEDs light up, it means that an alert has occurred and that additional investigation is necessary. The indicator LEDs on the GE Dual Communications Control Board give the operator a fast and easy method of monitoring the processing health of the board. If the red LED is lit, it indicates that an error condition has occurred. 

If 1 or both of the amber LEDs are lit, it indicates that an alert has occurred and that further investigation is required. Use the control panel on the drive to access the diagnostic tools. The control panel is a menu-driven interface. It produces an online report on the processing activities and the health of the components. It also provides a list of all error conditions and trip conditions. Trip conditions are conditions that have caused the drive to automatically shutdown.

The Series 90* -30 CPU374 PLUS provides a built-in enhanced Ethernet interface that  provides TCP/IP communications with: 

▪ Series 90, PACSystems, and VersaMax PLCs 

▪ Host computers running the Host Communications Toolkit or CIMPLICITY software 

▪ Computers running the TCP/IP version of the programming software CPU Features  

▪ High speed Boolean and non-Boolean processing provided by a 586-class 133MHz  processor 

▪ Two Ethernet ports: 10/100 Mbytes (one IP address) with a built-in, auto-sensing  Ethernet switch 

▪ Support for EZ Store Device allows you to download a program without a PC 

▪ 240KB of user memory Key Ethernet Features 

▪ Full PLC programming and configuration services 

▪ Periodic data exchange using Ethernet Global Data (EGD) and EGD commands to  read and write PLC and EGD exchange memory over the network 

▪ TCP/IP communication services using SRTP 

▪ Support for SRTP Client (Channels) 

▪ Modbus/TCP Server, supporting Modbus Conformance classes 0, 1, and 2. 

▪ Modbus/TCP Client, supporting Modbus Conformance classes 0, 1, and Function Codes 15, 22, 23, and 24 for Conformance class 2. 

▪ Remote PLC monitoring from a web browser 

▪ Comprehensive station management and diagnostic tools

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is used only under appropriate conditions and in a condition fully suitable for use.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.