DS3800HLIA1B1C | General Electric Div Multi Auxiliary Board

DS3800HLIA1B1C | General Electric Div Multi Auxiliary Board

Product Description P/N: DS3800HLIA1B1CDESCRIPTION / SPECIFICATIONSDescriptionThe DS3800HLIA1B1C is a GE Div Multi Auxiliary Board designed for quick installation in a drive system. The board features a modular connector on one end and retention levers on the opposite end. It is equipped with 15 red indicator LEDs and one amber LED, all of which are visible from the front of the board.Technical SpecificationsPart No DS3800HLIA1B1CProduct Name GE Div Multi Auxiliary BoardConnector Type Modular connector on one end, retention levers on the other endLED Indicators 15 red indicator LEDs, 1 amber LED visible from the frontInstallation Designed for quick installation in the driveInformation About DS3800HLIA1B1CThe GE Div Multi Auxiliary Board DS3800HLIA1B1C is designed for rapid installation within the drive. 

The board features a modular connector at one end and retention levers at the opposite end. This design facilitates efficient connection and secure installation. The DS3800HLIA1B1C is populated with 15 red indicator LEDs and one amber LED, all of which are visible from the front of the board. These LEDs provide visual indicators of the board's operational status.Upon receiving the DS3800HLIA1B1C from the factory, several steps must be taken before installation. First, it is essential to examine the shipping carton for any signs of mishandling during transit. This includes inspecting the cardboard for dents, holes, or other damage resulting from rough treatment. Additionally, it is necessary to check for signs of water or other liquid exposure, such as stains or indications that the box may have been submerged in water. 

These checks ensure that the board has not been compromised during shipping.Manufacturer informationGeneral Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.IQElectro is not an authorized distributor.QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

OTHER INFORMATION

• Up to 1.26 GHz Pentium® III processor with 256 KB advanced  transfer cache  

• Up to 512 MB PC-133 SDRAM using a single SODIMM  

• Internal AGP SVGA controller with 4 MB display cache  

• 133 MHz system bus via Intel® 815E chipset  

• Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces  

• Optional PCI dual channel Ultra160 SCSI  

• Up to three (two with rear I/O support) PMC expansion sites  (IEEE-P1386 common mezzanine card standard, 5 V)  

• Up to 1 GB bootable flash on secondary IDE (optional)  

• Two 16-bit and two 32-bit programmable timers  

• 32 KB of nonvolatile SRAM  

• Software-selectable watchdog timer with reset  

• Remote Ethernet booting  

• Optional IDE hard disk drive  

• VME64 modes supported:  A32/A24/D32/D16/D08(EO)/MBLT64/BLT32  

• VMEbus interrupt handler, interrupter and system controller  

• Includes real time endian conversion hardware for littleendian and big-endian data interfacing (patent no. 6,032,212)  

• Enhanced bus error handling  

• Passive heat sink