DS3800HSCG1D1E | General Electric High Level Isolator Board

DS3800HSCG1D1E | General Electric High Level Isolator Board

Product Description P/N: IS200EDISG1AAA DESCRIPTION / SPECIFICATIONS Description The Mark VI Power Distributor IS200EDISG1AAA was produced by General Electric and is considered obsolete due to it no longer being actively produced. This board has five switches, when reclosing those switches please wait thirty seconds before closing them. Technical Specifications Brand General Electric Functional Acronym/Abbreviation EDIS Part Number IS200EDISG1AAA Model Type Power Distribution Module Number of Bridge Switches 5 Power Supply 125 VDC Series Mark VI IS200 Storage Temperature -40 to +70 C Information About IS200EDISG1AAA The IS200EDISG1AAA board was manufactured as a Power Distributor board which indicates that it will supply power to other boards made by General Electric. 

This board can be used with the EX2100 System plus other DCS systems using Ethernet Modbus forward protocols. When the module is distributing and receiving power supplies it will accept both a DC (direct current) and AC (alternating current) power supply. Accepting these power supplies allows the board to control system hardware. The resulting power that occurred will feed other I/O boards, controllers, and bridge rectifier boards. The major components of this board are the switches, there are eleven switches. There are five bridge switches which are located along the right edge of the board respectively labeled Bridge 1 through Bridge 5. The five located on the bottom edge of the board are labeled PSM1, PSM2, PSC, PSAX1, and PSAX2. 

The remaining switch does not have a label. All along the board, there are female plug connectors, the total number of these connectors is fifty-two. Of the fifty-two connectors five are located directly underneath the PSM1, PSM2, PSC, PSAX1, and PSAX2 switches, these specific connectors are nine-pin connectors. One key feature of the IS200EDISG1AAA is its ability to be used in a number of different redundancy applications, the typical redundancy application for a module used in the Mark VI series is triple redundant as the main architecture of the Mark VI System is triple modular redundant. 

This module can be used in a combination of simplex, dual and triple redundancy modes. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. 

As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Main Functions

Power system monitoring and control:

The power interface board can be used for power system monitoring and control equipment to ensure the safe, stable and reliable operation of the power system.

Power plant automation:

In the power plant, it can be used to connect and manage the power supply of the mastering system and monitoring equipment to improve the automation level of the power plant.

Power transformer and distribution:

Applicable to substations and distribution stations, it is used to govern the power supply of transformers, circuit breakers and other equipments to ensure the high efficiency of power transmission and distribution.

Industrial Process Mastering:

In manufacturing and chemical workshops, this power interface board can be used for power management of automation systems, inner and control equipment to enhance productivity and safety.

Building Automation:

It can be used in building automation system, power supply to lighting, air conditioning, security equipment, etc., to achieve intelligent management of building equipment.

Railway flag signal system:

In the railway system, it is used in the power management of railway flag signal equipment and control system to ensure the stable operation of railway signal system.

Smart Grid:

In the smart grid, the power interface board can be used to connect and manage the digital power equipment and promote the intelligent development of the power grid.

Traffic Flag Signal System:

In the traffic flag signal system of routes and intersections, it is used to supply power to the flag master and equipment to ensure the normal display of traffic signals.

Aerospace:

In aviation and aerospace, the power interface board can be used in the control system of aircraft and spacecraft to provide stable and reliable power support.

It is suitable for land initiatives, oilfield equipment and other categories, providing power support for various land engineering equipment.