GE DS3800NCLA RS-232 Interface Card

GE DS3800NCLA RS-232 Interface Card

Part Number DS3800NCLA Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800NCLA is an RS-232 Interface Card developed by GE under the Mark IV series. This device was designed to be a part of the Speedtronic Mark IV series of turbine controllers. There are five integrated circuits on the board. Many different sorts of small components are found in each integrated circuit. Each chip has capacitors, diodes, and resistors. A black connector port is located on one side of the DS3800NCLA. 

Additional components and circuit boards can be connected to the board via this connector port. Two light-emitting diodes are located next to the connecting port (LEDs). A grey box with eight little gadgets may be found on the left side of the circuit board. Around the circuit board, there are at least four transistors. Near the top of the board are two medium-sized silver capacitors. Other capacitors of all sizes and colors are strewn across the board. On the board, there are a lot of resistors that are commonly placed together in rows. The circuit board is surrounded by diodes. All of our products are supplied in static-free packaging. To protect the user from static shock, our packaging absorbs all static energy before the product is opened.

Features 

Single slot CPU 

Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)
Supports floating point calculations 

Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs 

0.4 microseconds per boolean function 

64 MHz, 80486DX2 microprocessor 

Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only) 

Programmed by MS-DOS

, or Windows

 software products running on Windows

 95 or Windows NT

 over Ethernet TCP/IP or through the SNP port. 

Configurable data and program memory 

Battery-backed calendar clock 

Three position operation mode switch 

Password controlled access 

Remote programmer keyswitch memory protection 

Four status LEDs 

Software configuration (No DIP switches or jumpers) 

Reference information inside front door 

In-system upgradable firmware

Ease of Use

• Simple and powerful instruction set 

• One-axis or two-axis motion programs with synchronized block start 

• Program support for a short motion program (called Program Zero) which can be created in the MS-DOS programming software configuration function 

• Nonvolatile (flash) storage for 10 programs and 40 subroutines 

• User scaling of programming units (in Standard mode only) 

• Generic programming using command parameters as operands for Acceleration, Velocity, Move and Dwell commands 

• Configured with MS-DOS configuration software 

Technical features

Programmability: Users can program and customise the module according to specific application requirements to achieve precise control of industrial processes and improve productivity and product quality.

Integration and compatibility: The module can be seamlessly integrated with other ABB products and solutions to form a unified automation platform. It also has excellent compatibility with other manufacturers' equipment and systems.

High performance and reliability: High-performance hardware and software are used to ensure stable operation and efficient control in industrial environments. With advanced fault detection and diagnostic functions, potential problems can be detected and dealt with in a timely manner, improving the reliability of the system.

Flexibility and expandability: with modular design, it can be flexibly configured and expanded according to actual needs. Whether it is a small or large project, it can be easily integrated into the existing automation system.

Easy to use and maintain: Provides an intuitive user interface and powerful diagnostic tools, enabling users to operate and maintain with ease.