GE DS3800NEPB MOTOR EXCIT PWB BOARD

GE DS3800NEPB MOTOR EXCIT PWB BOARD

Part Number DS3800NEPB Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockGE's DS3800NEPB is a power excitation board from the Mark IV series. Power amplifiers, a field current feedback signal, an armature current feedback signal, a calibration circuit, high voltage resistor bridges, and a heatsink assembly are all included on the board. The board is inserted in the power conversion module, and the installer is exposed to deadly quantities of electrical energy if the module is turned on. 

 To provide a safe working environment, turn off the module and all other equipment, then turn off the power source. A manufacturing facility normally features three-phase power sources that provide enough power to run all of the gadgets. An engineering drawing detailing the 3-phase power wiring utilized at the site is normally available for your use. Refer to it to find the power source for the drive. To turn off the power to the drive, remove the fuses from the source. Examine the board's delivery box for damage and lay it on a clean, flat surface. When you open the box, you'll discover that the board is protected by a protective wrapper. Keep it in the wrapper to avoid static electricity. Static can harm the components on the board, resulting in a damaged board. Remove the board from the static protective bag as soon as possible before handling or installing it. If necessary, connect the DS3800NEPB board to other boards before installing it in the power converter module.

OTHER INFORMATION

• Up to 1.26 GHz Pentium® III processor with 256 KB advanced  transfer cache  

• Up to 512 MB PC-133 SDRAM using a single SODIMM  

• Internal AGP SVGA controller with 4 MB display cache  

• 133 MHz system bus via Intel® 815E chipset  

• Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces  

• Optional PCI dual channel Ultra160 SCSI  

• Up to three (two with rear I/O support) PMC expansion sites  (IEEE-P1386 common mezzanine card standard, 5 V)  

• Up to 1 GB bootable flash on secondary IDE (optional)  

• Two 16-bit and two 32-bit programmable timers  

• 32 KB of nonvolatile SRAM  

• Software-selectable watchdog timer with reset  

• Remote Ethernet booting  

• Optional IDE hard disk drive  

• VME64 modes supported:  A32/A24/D32/D16/D08(EO)/MBLT64/BLT32  

• VMEbus interrupt handler, interrupter and system controller  

• Includes real time endian conversion hardware for littleendian and big-endian data interfacing (patent no. 6,032,212)  

• Enhanced bus error handling  

• Passive heat sink

SPECIFICATIONS

Input voltage：110V-380V

Electric current：1A-30A

Power： 5W-130W

Warranty period：1 year

Stock Quantity：30

Place of origin：United States, France, Japan, Viet Nam, Australia, Russia, Germany, Italy, Arabia 

APPLICATIONS

• Simulation 

• Instrumentation 

• Industrial control 

• Process control and monitoring 

• Factory automation 

• Intelligent networked PLC controllers 

• Automated test 

• Data acquisition