DS3800NPSM1F1D | General Electric Mark IV Board

DS3800NPSM1F1D | General Electric Mark IV Board

Product Description P/N: DS3800NPSM1F1DDESCRIPTION / SPECIFICATIONSDescriptionThe DS3800NPSM1F1D is a power supply circuit board manufactured by General Electric as part of the Speedtronic Mark IV series. This printed circuit board (PCB) features three inductors labeled L1 through L3, with L1 and L2 positioned near the top and L3 located underneath with a black cover. It includes two large diodes at the left end, each connected by two wires.Technical SpecificationsPart Number DS3800NPSM1F1DType Power Supply Circuit BoardSeries Speedtronic Mark IVInductors 3 inductors labeled L1 through L3Inductor Position L1 and L2 near the top; L3 under L1 and L2 with a black coverDiodes 2 large diodes on the left end, each with 2 wiresInformation About DS3800NPSM1F1DThe DS3800NPSM1F1D is a power supply circuit board manufactured by General Electric as part of the Speedtronic Mark IV series. This printed circuit board (PCB) is utilized within GE's industrial control systems.

The DS3800NPSM1F1D features three inductors, designated L1 through L3. Of these, L1 and L2 are positioned near the top edge of the board, while L3 is located beneath L1 and L2 and is covered with a black protective cover. Each inductor is connected to the PCB via wiring.On the left end of the board, there are two large diodes, each connected by two wires. In the lower left corner of the PCB, two large silver transistors are present. Additionally, there are four smaller transistors scattered across the board, all labeled with the letter Q.A prominent feature of the DS3800NPSM1F1D is a large blue capacitor, which is mounted vertically near the top of the board. The PCB also includes five orange capacitors, as well as several small capacitors in various colors such as red, blue, and yellow. All capacitors on the board are marked with the letter C.

Manufacturer informationGeneral Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.IQElectro is not an authorized distributor.QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).