GE DS3800NTSA CIRCUIT BOARD

GE DS3800NTSA CIRCUIT BOARD

Part Number DS3800NTSA Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockGeneral Electric Speedtronic Mark IV DS3800NTSA is a printed circuit board as a part of the Mark IV Series. Within the Mark IV series, the DS3800NTSA serves as a scanner board. With roll pins, two nylon extractor clips are fastened to the right corners of the board. Depending on whether the board is being installed or uninstalled, these clips serve as both a handle and a lever point. There are three PCB mating connectors on the DS3800NTSA. 

 On the right edge, there are two 218A4637-P2 right-angled male connectors. On the opposite side of the board, there is an A-mp 27791-1 7733 218A4683-00l connector. Near the first two connectors, there are two test sites. Four potentiometers, one jumper, and twelve transistors are used in the DS3800NTSA. Carbon composite and metal film resistors are used in its material. Ceramic, polyester film, and other materials can be used as capacitors. Nine integrated circuits are present on the board. The twelve CP Clare mercury wetted contact relays are the most visible component on the DS3800NTSA (HGS2x 5040 218A4826 1.) Two parallel lines of six relays are used. The second and third relays of each row are connected with a board stiffener.

OTHER INFORMATION

• Up to 1.26 GHz Pentium® III processor with 256 KB advanced  transfer cache  

• Up to 512 MB PC-133 SDRAM using a single SODIMM  

• Internal AGP SVGA controller with 4 MB display cache  

• 133 MHz system bus via Intel® 815E chipset  

• Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces  

• Optional PCI dual channel Ultra160 SCSI  

• Up to three (two with rear I/O support) PMC expansion sites  (IEEE-P1386 common mezzanine card standard, 5 V)  

• Up to 1 GB bootable flash on secondary IDE (optional)  

• Two 16-bit and two 32-bit programmable timers  

• 32 KB of nonvolatile SRAM  

• Software-selectable watchdog timer with reset  

• Remote Ethernet booting  

• Optional IDE hard disk drive  

• VME64 modes supported:  A32/A24/D32/D16/D08(EO)/MBLT64/BLT32  

• VMEbus interrupt handler, interrupter and system controller  

• Includes real time endian conversion hardware for littleendian and big-endian data interfacing (patent no. 6,032,212)  

• Enhanced bus error handling  

• Passive heat sink

Product Features

High performance: adopting high-performance microprocessor and advanced control algorithm, it can realise fast and accurate control and monitoring, and improve production efficiency and product quality.

Modular design: It is convenient for users to configure and expand, which improves the flexibility and maintainability of the system.

Easy Integration: Provide standard communication interface and protocol, which is convenient for users to integrate with other equipments and achieve seamless connection.

High reliability: Made of high-quality materials and advanced technology, it has high reliability and stability, and can operate stably under harsh working environment.

Easy to use: Provides simple interface and easy-to-operate software, which is convenient for users to install and use. At the same time, the module also has a self-diagnostic function, which can help users quickly locate faults and maintenance.

Good scalability: can be seamlessly integrated with other ABB modules and equipment, which is convenient for users to build a large-scale automation control system.