GE DS3800XCJB Backplane Card

GE DS3800XCJB Backplane Card

Part Number DS3800XCJB Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800XCJB is a Backplane Card manufactured and designed by General Electric as part of the Mark IV Series used in GE Speedtronic Gas Turbine Control Systems. A PLC expansion backplane card is a circuit board that connects to the main PLC unit and provides additional slots for various expansion modules. This backplane card facilitates the integration of more I/O points or other functionalities that the PLC might need to control and monitor complex industrial processes. 

 Modular Expansion: This allows for the addition of multiple I/O modules, communication interfaces, and specialized function modules to the PLC system, thus expanding its capabilities. Signal and Data Routing: Routes signals and data between the main PLC unit and the expansion modules, ensuring reliable and efficient communication. Power Distribution: Distributes power from the main PLC unit to all connected expansion modules, ensuring a stable and adequate power supply for each module. Flexibility and Scalability: This enables the PLC system to be easily scaled and customized according to the specific requirements of the industrial application. DESIGN CONSIDERATIONS: Slot Configuration: The number and types of slots should accommodate the required I/O modules and other expansion cards needed for the application. 

Compatibility: The backplane card must be compatible with the main PLC unit and the various expansion modules in terms of electrical specifications and communication protocols. Signal Integrity: Ensuring that the signal quality is maintained across the backplane to prevent data loss or corruption, especially in high-noise industrial environments. Power Management: Efficient power distribution is crucial to prevent overloads and ensure reliable operation of all connected modules. Robustness and Reliability: The backplane card should be durable and able to withstand harsh industrial conditions, including temperature extremes, vibration, and electrical noise.

SPECIFICATIONS:

Part Number: DS3800XCJB
Manufacturer: General Electric
Series: Mark IV
Product Type: Backplane Card
Power Requirements: +5 V dc
Power supply voltage: 24 V dc
Operating temperature: 0 to +75°C
Size: 171mm x 135mm
Weight: 0.5kg
Repair: 3-7 Day
Availability: In Stock
Country of Origin: United States

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module