GE DS3820AIPA ANALOG I/O MODULE Industrial Control Systems Innovation

DS3820AIPA ANALOG I/O MODULE Industrial Control Systems Innovation

Manufacturer:General Electric Model Number:DS3820AIPA Application Type:Analog Input/Output Module Type:I/O Board Type:DS3800 Series Input Voltage Range:9 to 32V DC Operating Temperature:-40"C to +70"C Diode Count:Approximately 70 Resistor Count:Approximately 100 Power Consumption:1.5W Weight:0.5kg Connector Type:DB9 Communication Interface:RS-232 The GE DS3820AIPA ANALOG I/O MODULE is an essential component for enhancing the performance of industrial control systems. It features a high density of teal diodes and resistors, meticulously arranged for optimal energy management in circuitry. Engineered for durability, this module withstands the rigors of industrial environments, ensuring stable operation under varying conditions. Its unidirectional energy flow through the diodes guarantees precise signal transmission. 

 With a broad array of resistors color-coded for easy identification of their respective values, technicians can quickly understand and configure the module according to specific application requirements. While the exact dimensions and weight are not explicitly detailed in the provided information, the DS3820AIPA is designed to integrate seamlessly into existing systems without compromising space or adding unnecessary bulk. For comprehensive guidance on installation and safety measures, it  recommended to consult the original manufacturer  manual. AX Control supports users in accessing and understanding the necessary documentation for proper handling and integration. The GE DS3820AIPA Analog I/O Module is designed for precision control in industrial applications, offering high accuracy and reliability in data acquisition and processing.

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).