GE DS3800HXRB1B1B High Performance Bus Receiver, Designed for Industrial Control Systems

DS3800HXRB1B1B High Performance Bus Receiver, Designed for Industrial Control Systems

Model:DS3800HXRB1B1B Category:Bus Receivers Series:Mark IV Type:Bus Communication Module Function:Data Reception and Transmission Mounting:Twelve Screw Mounting Points LEDs:Over Thirty-Five Red LEDs Switch:Integrated Switch for Configuration Connection Points:Nine Separate Wiring Harness Connections Compatibility:Female Harness Compatible Engineered for Durability and Reliability The DS3800HXRB1B1B Bus Receiver is built to withstand harsh industrial conditions, ensuring continuous operation even under extreme temperatures and environmental pressures. Enhanced System Efficiency With its advanced signal processing capabilities, this receiver optimizes data transmission, leading to improved system performance and reduced downtime. 

 Intuitive LED and Switch Design The board features a clear visual feedback system through its array of LEDs and a user-friendly switch, enabling quick status checks and configuration adjustments without complex setup procedures. Secure Installation and Maintenance The twelve screw mounting locations facilitate straightforward installation and easy maintenance, reducing the risk of hardware damage during servicing. Comprehensive Compatibility The use of female harness connection points ensures seamless integration with a wide range of wiring harnesses, simplifying the setup process for various industrial applications. The GE DS3800HXRB1B1B Bus Receiver is a critical component in turbine control systems, designed for seamless data transfer and system synchronization.

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).