GE DS3820DIMC Datatronics Isolation Module

GE DS3820DIMC Datatronics Isolation Module

Part Number DS3820DIMC Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3820DIMC is a Datatronics Isolation Module manufactured and designed by General Electric as part of the Mark IV Series used in GE Speedtronic Gas Turbine Control Systems. A 10Base-T Isolation Module is a device that is used in Ethernet networks to isolate the network signals and provide protection against electrical interference. It is specifically designed for use in 10 Mbps Ethernet networks that use the 10Base-T standard, which is a type of twisted-pair Ethernet. The purpose of the isolation module is to separate the data signals from the power signals that are transmitted over the same twisted pair cable. This is achieved by using transformers to isolate the data signals from the power signals, which helps to prevent electrical interference and provides a more stable and reliable network connection. 

 FEATURES: Isolation Modules have several features that make them useful in network applications. Here are some of the common features of isolation modules: Signal Isolation: As the name suggests, isolation modules are designed to isolate signals and prevent electrical interference. They typically use transformers or other isolation components to separate the data signals from power signals and reduce the risk of EMI or RFI. Compact Size: Isolation modules are designed to be compact and easy to install, often in small spaces or inside network devices. Low Power Consumption: Many isolation modules are designed to consume very little power, which helps to keep the overall power consumption of the network low. High Reliability: Isolation modules are typically designed to be very reliable and durable, even in harsh environments. They often have high-temperature ratings and are resistant to shock and vibration.

SPECIFICATIONS:

Part Number: DS3820DIMC
Manufacturer: General Electric
Series: Mark IV
Product Type: Datatronics Isolation Module
Power Requirements: +5 V dc, 7 A
Power supply voltage: 24 V dc
Operating temperature: -40 to +65°C
Size: 15.7 cm high x 18.5 cm
Weight: 0.5kg
Repair: 3-7 Day
Availability: In Stock
Country of Origin: United States

OTHER INFORMATION

• Up to 1.26 GHz Pentium® III processor with 256 KB advanced  transfer cache  

• Up to 512 MB PC-133 SDRAM using a single SODIMM  

• Internal AGP SVGA controller with 4 MB display cache  

• 133 MHz system bus via Intel® 815E chipset  

• Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces  

• Optional PCI dual channel Ultra160 SCSI  

• Up to three (two with rear I/O support) PMC expansion sites  (IEEE-P1386 common mezzanine card standard, 5 V)  

• Up to 1 GB bootable flash on secondary IDE (optional)  

• Two 16-bit and two 32-bit programmable timers  

• 32 KB of nonvolatile SRAM  

• Software-selectable watchdog timer with reset  

• Remote Ethernet booting  

• Optional IDE hard disk drive  

• VME64 modes supported:  A32/A24/D32/D16/D08(EO)/MBLT64/BLT32  

• VMEbus interrupt handler, interrupter and system controller  

• Includes real time endian conversion hardware for littleendian and big-endian data interfacing (patent no. 6,032,212)  

• Enhanced bus error handling  

• Passive heat sink