GE DS3820EVCC POWER SUPPLY

GE DS3820EVCC POWER SUPPLY

Part Number DS3820EVCC Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3820EVCC is a Power Supply Board and is part of the GE Speedtronic Mark IV gas turbine control system for industrial gas turbines and steam turbines. The MK IV was the first of the Speedtronic gas and steam control systems to have triple modular redundant controllers, which reduced downtime due to hardware failure dramatically. This is a big, intricate piece of machinery with a lot of different parts. 

The power supply board external metal housing is the first step. On its metal feet, the housing is designed to fit into a bay-type enclosure. A front bottom panel of the machine allows for the connecting and control of several connected connections. Two DS3820C12 Current Isolator Modules are mounted to the front panel of the unit above this. Several other components, including a DS3800NFCG firing board, various rectifier components, fuse components, and other components, fill the interior of the DS3820EVCC. Surface wire or ribbon cables are used to connect individual components. Zip ties are commonly used to control cable bundling.

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required

Ease of Use

• Simple and powerful instruction set 

• One-axis or two-axis motion programs with synchronized block start 

• Program support for a short motion program (called Program Zero) which can be created in the MS-DOS programming software configuration function 

• Nonvolatile (flash) storage for 10 programs and 40 subroutines 

• User scaling of programming units (in Standard mode only) 

• Generic programming using command parameters as operands for Acceleration, Velocity, Move and Dwell commands 

• Configured with MS-DOS configuration software 

Technical features

Programmability: Users can program and customise the module according to specific application requirements to achieve precise control of industrial processes and improve productivity and product quality.

Integration and compatibility: The module can be seamlessly integrated with other ABB products and solutions to form a unified automation platform. It also has excellent compatibility with other manufacturers' equipment and systems.

High performance and reliability: High-performance hardware and software are used to ensure stable operation and efficient control in industrial environments. With advanced fault detection and diagnostic functions, potential problems can be detected and dealt with in a timely manner, improving the reliability of the system.

Flexibility and expandability: with modular design, it can be flexibly configured and expanded according to actual needs. Whether it is a small or large project, it can be easily integrated into the existing automation system.

Easy to use and maintain: Provides an intuitive user interface and powerful diagnostic tools, enabling users to operate and maintain with ease.