FOXBORO IDP10-AF1C01F Electronic Differential Pressure Transmitter

FOXBORO IDP10-AF1C01F Electronic Differential Pressure Transmitter

Product Overview

The FOXBORO IDP10-AF1C01F is an analogue output, two-wire d/p Cell® transmitter that provides accurate and reliable differential pressure measurement and transmits a 4 to 20mA analogue output signal. It is widely used in industrial automation and process control applications in industries such as chemical, oil and gas, manufacturing, power, and water treatment to monitor and control critical parameters in industrial processes.

Technical features

Measuring range and accuracy:

IDP10-AF1C01F transmitter has high accuracy measurement capability, its measurement range and accuracy depends on the model and configuration. The specific measuring range needs to be selected according to the actual application requirements.

Output Signals:

The transmitter provides analogue output signals from 4 to 20mA, as well as optional superimposed HART® digital signals for remote configuration and monitoring.

Construction and Design:

Available in traditional or low-profile construction to accommodate different installation needs.

Enclosures are made of durable aluminium or 316 SS, both of which meet NEMA 4X and IP66 ratings to ensure stable operation in a variety of harsh environments.

Sensor Materials:

Sensor materials include industry standard 316L ss, Co-Ni-Cr, nickel alloy, monel alloy, or tantalum, depending on transmitter construction, to meet the corrosion resistance needs of different applications.

Mounting and Configuration:

Optional mounting bracket kits allow for pipe, surface, or manifold mounting of the transmitter, providing flexible mounting options.

Configuration and monitoring can be done remotely via the HART® communication protocol, or locally via the optional LCD display.

Certification and Compliance:

The transmitter is CE-marked and complies with applicable EMC, ATEX and PED European directives, ensuring compliance with international safety standards and regulations.

Application Areas

FOXBORO IDP10-AF1C01F Electronic Differential Pressure Transmitter is widely used in industrial automation and process control, especially where precise measurement and transmission of differential pressure signals are required. It can be used to monitor and control key parameters in various industrial processes, such as fluid pressure, level, flow, etc. It provides stable and reliable signal input for industrial automation systems.

Product Advantages

High accuracy: advanced silicon strain gauge sensor and microprocessor-based calibration technology for excellent accuracy and ambient temperature compensation.

High Reliability: Rugged design and high quality materials ensure stable operation in a variety of harsh environments.

Flexibility: A wide range of construction, sensor material and mounting options are available to suit different application requirements and installation environments.

Easy to Configure and Maintain: Remote configuration and monitoring via HART® communication protocol, or local communication and configuration via optional LCD display for user-friendly troubleshooting and maintenance.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.