GE A20B-2101-0870 Power Circuit Board
GE A20B-2101-0870 Power Circuit Board
Basic Information
Product Name: GE A20B-2101-0870 Power Circuit Board (or GE Drive Side/Control Board)
Manufacturer: GE (General Electric) or its co-brand Fanuc (Fanuc)
Model: A20B-2101-0870
Technical Specifications and Features
Specifications Dimensions: Usually have standard board dimensions, but exact dimensions may vary by manufacturer and batch.
Material code: 2348525483 (or other relevant codes, subject to the information provided by the manufacturer)
Colour: Standard industrial grey or as specified by the manufacturer.
Communication Capability: Supports master and slave communication for easy data transfer and control in industrial automation systems.
Fibre optic Ethernet port: Provides 100 Mbps fibre optic Ethernet connection to ensure high speed and stable data transmission.
Serial Port: Usually equipped with multiple serial ports (e.g. 4) for connecting various external devices.
Programme capacity: 16MB (or according to specific information provided by the manufacturer) for storing control programmes and parameters.
Power consumption: 5.6W (or according to specific information provided by the manufacturer), with low energy consumption.
Operating temperature: 0 to 85 degrees Celsius for a wide range of industrial environments.
Humidity: 0 to 95% (no condensation), ensuring normal operation even in humid environments.
Functions and Applications
Function: As a key component in the industrial automation system, this board is responsible for providing stable power and control signals to ensure the normal operation of the system. It supports a variety of communication protocols and interface standards, facilitating integration with other equipment and systems.
Applications: It is widely used in various industrial automation and control systems, such as PLC (Programmable Logic Controller), DCS (Distributed Control System), CNC system, etc.. In addition, it can be used for control and power management of servo drives, workstations, motors, memory cards, power supplies and other devices.
Markets & Availability
Market: GE A20B-2101-0870 Power Circuit Board occupies an important position in the global industrial automation market and is favoured by many manufacturers and system integrators.
Supply: The product can be purchased through a variety of channels, including the manufacturer's official website, authorised dealers and distributors, and professional industrial automation and control system suppliers.
Precautions
Compatibility: When purchasing and installing the GE A20B-2101-0870 Power Circuit Board, please ensure that it is compatible with your system and follow the manufacturer's installation and configuration guidelines.
Care and Maintenance: Inspect and maintain the board regularly to ensure its long-term stable operation. Avoid use in harsh environments to avoid damage to the circuit board.
Technical Support: If you encounter technical problems or need repair services, please contact the manufacturer or an authorised repair centre for support.
Product Parameters and Specifications
Processor: 32-bit RISC processor
Clock frequency: 100 MHz
Memory: 128MB
Flash memory: 256MB
Communication interface: RS-232/485, Ethernet, etc.
Input/output interface: analogue input/output, digital input/output
Operating temperature: -25°C to +60°C
Storage temperature: -40°C to +85°C
Relative humidity: 5% to 95% (non-condensing)
Protection rating: IP65
Product specification: 300mm x 200mm x 100mm
Installation and Maintenance
Environmental conditions:
Ensure that the module is installed within the recommended temperature and humidity ranges and avoid direct exposure to water, oil, dust or electromagnetic interference.
Power Requirements:
Use a stable power supply to avoid damage to the module from voltage fluctuations.
Signal Cable Connection:
Connect the signal lines correctly to ensure the accuracy and stability of signal transmission.
Software Configuration:
Correctly configure the software parameters of the module according to the system requirements to ensure compatibility with other parts of the control system.
Maintenance and Inspection:
Perform regular maintenance and inspection of the module, including cleaning and checking the contact status of the connectors.
Precautions
Operator Training:
Operators should receive proper operation and maintenance training to avoid malfunctions or safety accidents caused by incorrect operation.
Technical Documentation and Safety Guidelines:
The technical documentation and safety guidelines provided by the manufacturer should be read and understood in detail before installation and use.
Compliance with safety procedures:
Observe all relevant safety procedures to ensure personal safety, especially when handling high-pressure or high-speed rotating equipment.
email:1583694102@qq.com
wang@kongjiangauto.com