GE DS200NATOG3A Voltage Feedback Scaling Board

GE DS200NATOG3A Voltage Feedback Scaling Board

ABOUT THE DS200NATOG3A 

General Electric Voltage Feedback Sensing Board model DS200NATOG3A is used for attenuating DC and AC voltages through an SCR bridge, this allows for the bridge voltage feedback to be precisely derived. To work correctly this model must be used with a gate distribution status board and a VME backplane board. There are multiple stab connectors on the board, there are three stab connectors in each of the five resistor strings to allow power connection to a number of different resistors to accommodate a variety of voltages. 

Product Overview

The GE DS200NATOG3A voltage feedback scaling board is an important component of the Mark V-Series exciter and drive. It enables precise control of the exciter and drive by receiving voltage feedback signals and scaling them to the appropriate range. The board is stable, safe and programmable, and supports a variety of operating systems and programming languages, meeting the diverse needs of industrial automation and control systems.

Product Features

Multiple voltage input configurations:

The voltage feedback scaling board has built-in resistor strings that can be configured to attenuate five different voltage inputs, i.e., 1200 V, 2200 V, 3300 V, 4200 V, and 6900 V. This design allows the board to adapt to different voltage levels of exciters and drives, increasing its versatility and flexibility.

Built-in Ethernet communication:

The GE DS200NATOG3A Voltage Feedback Scaling Board has built-in Ethernet user-supported communications that support SRTP and Modbus TCP/IP application protocols. This allows users to easily monitor and configure the board remotely over a LAN or the Internet, improving system maintainability and scalability.

Programmability:

The board supports a variety of programming languages such as Ladder Diagram (LDI), Instruction List (IL), Structured Text (ST) and C Block. Users can programme the board to customise and expand its functionality to meet the needs of specific application scenarios.

Fieldbus Interface:

The GE DS200NATOG3A Voltage Feedback Scaling Board provides a variety of fieldbus interfaces to support distributed control and/or I/O. Users can choose from a wide range of easy-to-install and quick-to-configure fieldbus interface modules for seamless connectivity with other devices and systems.

Stable and safe:

The board is made of high-quality materials and advanced production processes to ensure its stability and safety. It is also certified by UL, EC and CSA to meet the requirements of transient control and known standards.

Areas of application

GE DS200NATOG3A voltage feedback scaling board is widely used in industrial automation, power systems, energy management and other fields. It can connect various sensors, actuators, controllers and other devices to achieve precise control of the exciter and drive, and improve the overall performance and stability of the system. At the same time, the board also supports remote monitoring and configuration, making it easy for users to manage and maintain the system.

Purchase and Maintenance Recommendations

Purchase channels:

Users can purchase the GE DS200NATOG3A Voltage Feedback Scaling Board through GE's official website, authorised agents or distributors. When purchasing, be sure to check the model, specifications and quantity of the product to ensure that you purchase a product that meets your needs.

Maintenance Recommendations:

Regularly inspect and maintain the board to ensure that it is in good working condition. Pay attention to keep the circuit board clean and dry to avoid moisture and corrosion.

In the course of use, if any abnormality or malfunction of the circuit board is found, the technical support or after-sales service team of GE should be contacted in time to deal with it. At the same time, users can also refer to the relevant user manuals and technical documents to carry out troubleshooting and maintenance on their own.

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider