GE MRP081636 IS200TSVCH1AJE Analog Input Board

GE MRP081636  IS200TSVCH1AJE Analog Input Board

Product Overview

The IS200VAICH1DAB model is manufactured by General Electric as an analog input/output board for TMR or simplex applications in Mark V systems. When used for TMR system configuration, the input signals from the connected terminal board, TBAIH1C, or STAI board will be fanout to three VME racks: T, R, and S, each rack containing a VAIC board. The output signal on the VAIC board will be driven by a proprietary circuit, using all available VAIC boards to create the required current. If any IS200VAICH1DAB model on the VME rack malfunctions, the faulty VAIC model will be removed from the output, and the remaining VAIC boards can continue to provide the correct current. When the model is used for simplex configuration, the connected terminal board will provide input to one of the VAIC models, thereby providing all current to the output.

The characteristics of the IS200VAICH1DAB module are as follows:

High reliability: This module uses high-quality raw materials and advanced production processes, which have high reliability and stability, ensuring long-term stable operation.

Multiple functions: This module has various functions such as digital input/output and analog input/output, which can meet various industrial automation and process control needs.

Easy to configure and use: This module has a simple and easy-to-use configuration software and programming interface, making it convenient for users to configure and use.

Wide applicability: This module is suitable for various industrial automation and process control fields, such as power, chemical, pharmaceutical, etc.

Technical Specifications

Input Voltage Range: Multiple voltage ranges may be supported, but specific values are not explicitly mentioned in the referenced article.

Output Voltage/Current:

Output voltage: may support 0-20mA

Output current: 0-200mA may be supported

Input: supports analogue input of 4-20mA

Operating environment:

Operating environment: Normal temperature and pressure

Operating temperature: -20°C to +50°C

Storage temperature: -40°C to +70°C

Ambient humidity: 5% to 95% relative humidity (no condensation)

Dimensions and weight:

Dimensions: 170mm x 105mm x 32mm

Weight: approx. 120g

Other characteristics:

Form of construction: Modular

CPU: 32-bit RISC processor possible

Efficiency: greater than 90%

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations in accordance with EN 50110-1 must be fully complied with when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Make sure that the installation is complete.

4 Perform earthing and short-circuiting.